6" x 2" Conversion Polishing Mop Kit For 1/2 HP Grinders 3 Mops Compounds Spindle
COARSE / SISAL MOP
Suitable for removing scratches and bad staining as well as paint and rust.
Fast cutting first stage polishing mop.
Coarse buffing wheel used for the 1st stage of metal polishing
Removes light marks left from preparation and are usually suitable for use with a grey compound
Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and nonferrous materials
Fastened together with leather washers for maximum support when using the mop
British Manufactured mops
Suitable for use with a bench grinder / polishing machine
Used on a taper spindle
SPECIFIC SPECIFICATIONS
DIAMETER OF THE MOP 6" (150mm)
WIDTH OF THE MOP 2" (4 ROW) (50mm)
MAXIMUM SPEED 3000RPM
WHITE CLOSE STITCHED MOP
Multi layered and tight stitched polishing mop to provide a top quality durable mop
Manufactured from 100% white cotton
Very versatile polishing and buffing wheel used for the first cut, general polishing or finishing.
Suitable for a number of materials including aluminium, alloys, brass, copper, steel and stainless steel
Normally used in the middle stage of the polishing process and are usually used with green compound
Good for a one shot polishing operation where you need the brightness back and the condition of the metal is not marked / scratched or badly pitted
Fastened together with leather washers for maximum support when using the mop
Suitable for use straight away
British Manufactured mops
Suitable for use with a bench grinder / polishing machine
Used on a taper spindle
SPECIFIC SPECIFICATIONS
DIAMETER OF THE MOP 6" (150mm)
WIDTH OF THE MOP 2" (4 ROW) (50mm)
MAXIMUM SPEED 3000RPM
G LOOSE UNSTITCHED FLOPPY MOP
Suitable for the final stage polishing and finishing on nonferrous and ferrous surfaces
Most popular grade of finishing mop
100% cotton discs
Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and nonferrous materials such as plastics etc.
Also suitable for use on woods and resins
Fastened together with leather washers for maximum support when using the mop
Does not fray or leave as much dust as other finishing mops
British Manufactured mops
Suitable for use with a bench grinder / polishing machine
Used on a taper spindle
Suitable for use straight away
Normally used in the final stage of the polishing process and are usually used with blue compound
SPECIFIC SPECIFICATIONS
DIAMETER OF THE MOP 6" (150mm)
WIDTH OF THE MOP 2" (4 ROW) (50mm)
MAXIMUM SPEED 3000RPM
MENZEMA GREY COARSE COMPOUND
Heavy duty compound for hard materials
Suitable for use with a number of materials including steel, stainless steel, iron and titanium etc.
The polishing compound is use by polishers on metals to cut and bring out the colour of the material.
Commonly used with a sisal mop
Long lasting composition with minimum usage
Water soluble
Will not cause any discoloration
Will remove 240 320 grit marks
Total weight of the bar 250 grams
MENZEMA GREEN PRE POLISHING BUFFING COMPOUND
Pre polishing compound that is suitable for all metals.
Dual Purpose medium abrasive compound for first stage polishing of soft materials and final buffing of harder materials.
Commonly used with a sisal stitched mop.
Long Lasting composition with minimum usage.
Suitable for use with a number of materials including steel, stainless steel, iron and titanium etc.
Will not cause any discoloration.
Water Soluble.
Total weight of the bar 250 grams.
MENZEMA BLUE FINAL FINISHING COMPOUND
Suitable for the final stage of polishing
Suitable for use with a number of materials including steel, stainless steel, iron and titanium etc.
Recommended for use with final finishing floppy buffing wheels
Long Lasting composition with minimum usage.
Will not cause any discoloration.
Water Soluble.
Total weight of the bar 250 grams.
POLISHING SPINDLE
This spindle allows you to convert your bench grinder into a polishing machine
Brings the mop out away from the machine and providing a taper thread for you to attach a mop
Fits virtually all 6" bench grinders (with a 1/2" shaft)
Suitable for a right hand side of your grinder as you look at the front
Fixes via a grub screw (we do not use threaded spindles because you rely on the accuracy of the thread on the grinder which often leads to a wobbly non centres shaft).
Total length of the spindle 43/4" / 120mm