AB Tools Coarse / Medium / Final G Mops Polishing Sisal Floppy Mop 10" x 2" 4 Section 3pc

COARSE POLISHING MOP

Professional tool for commercial or occasional use

Coarse sisal mop

Suitable for removing scratches and bad staining as well as paint and rust.

Fast cutting first stage polishing mop.

Coarse buffing wheel used for the 1st stage of metal polishing

Removes light marks left from preparation and are usually suitable for use with a grey compound

Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and nonferrous materials

Fastened together with leather washers for maximum support when using the mop

British Manufactured mops

Suitable for use with a bench grinder / polishing machine

Used on a taper spindle

SPECIFIC SPECIFICATIONS

DIAMETER OF THE MOP 10" (250mm)
WIDTH OF THE MOP 2" (4 ROW) (50mm)
MAXIMUM SPEED 3000RPM

MEDIUM STITCHED MOP

Professional tool for commercial or occasional use

Medium Polishing mop

Multi layered and tight stitched polishing mop to provide a top quality durable mop

Manufactured from 100% white cotton

Very versatile polishing and buffing wheel used for the first cut, general polishing or finishing.

Suitable for a number of materials including aluminium, alloys, brass, copper, steel and stainless steel

Normally used in the middle stage of the polishing process and are usually used with green compound

Good for a one shot polishing operation where you need the brightness back and the condition of the metal is not marked / scratched or badly pitted

Fastened together with leather washers for maximum support when using the mop

Suitable for use straight away

British Manufactured mops

Suitable for use with a bench grinder / polishing machine

Used on a taper spindle

SPECIFIC SPECIFICATIONS

DIAMETER OF THE MOP 10" (250mm)
WIDTH OF THE MOP 2" (4 ROW) (50mm)
MAXIMUM SPEED 3000RPM

G LOOSE FLOPPY MOP

Professional tool for commercial or occasional use

Suitable for the final stage polishing and finishing on nonferrous and ferrous surfaces

Most popular grade of finishing mop

100% cotton discs

Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and nonferrous materials such as plastics etc.

Also suitable for use on woods and resins

Fastened together with leather washers for maximum support when using the mop

Does not fray or leave as much dust as other finishing mops

British Manufactured mops

Suitable for use with a bench grinder / polishing machine

Used on a taper spindle

Suitable for use straight away

Normally used in the final stage of the polishing process and are usually used with blue compound

SPECIFIC SPECIFICATIONS

DIAMETER OF THE MOP 10" (250mm)
WIDTH OF THE MOP 2" (4 ROW) (50mm)
MAXIMUM SPEED 3000RPM