Compatible Nespresso Capsule Coffee Machine with Mixer Pod Black and Silver

YARRA
Compatible Nespresso Capsule Coffee Machine with Mixer Pod Black and Silver
Shop all Coffee Machines

Modern yet contemporary vintage style ceiling lamp. The glittering crystals and shining lights of drop ceiling light fixtures can make your house look beautiful. This is made up of stained glass with steel, E27 screw type base and black textile cord. The weight and material of bar pendant lights are strictly controlled so that they would never fall down easily.

Specification

  • 220-240V 50Hz 1050W
  • Water tank capacity: 650ml
  • Milk tank capacity: 450ml
  • High pressure 20 bar
  • Preheating can be finished within 40 seconds
  • Can brew big cup & small cup coffee automatically
  • Coffee temperature can be up to 72-84 degree Celsius
  • Heat efficiency of brewing system can be above 90%
  • With flow meter for controlling the flow precisely and the tolerance of coffee output is +/-5ml
  • With NTC for controlling temperature and the tolerance of temperature is +/- 5 degree Celsius
  • Equip with electric IMD control panel
  • Adopt motor-driver technology for frothing milkl
  • Warranty: 1 Year with Australian safety approval

The Following

  1. Read all instructions.
  2. Make sure that your outlet voltage corresponds to the voltage stated on the rating label of the coffee maker.
  3. To protect against fire, electric shock and injury to persons do not immerse cord, plug or unit in water or other liquid.
  4. Close supervision is necessary when any appliance is used by or near children.
  5. Unplug from outlet when not in use and before cleaning. Allow to cooling before putting on or taking off parts, and before cleaning the appliance.
    Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to an authorized service facility for examination, repair or adjustment.
  6. The use of accessory not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.
    Do not let cord hang over edge of table or counter, or touch hot surface.
    Do not place on or near a hot gas or electric burner, or in a heated oven.
  7. Use on a hard, flat level surface only, to avoid interruption of airflow underneath the appliance.
  8. Always be sure to place the water reservoir tightly back in the unit with its lid closed and fill with water on or above the minimum before turning appliance on.
  9. Only fill the water reservoir with clean and cold water. Never fill it with mineral water, milk or other liquids.
    Do not let the coffee maker operate without water.
  10. Never insert finger into the capsule holder to avoid nipping finger.
  11. There is extremely hot water in the capsule holder during the brew process. To avoid risk of injury, do not lift the brew handle during brewing process.
  12. To disconnect, remove plug from wall outlet. Always hold the plug. But never pull the cord.
  13. Some parts of appliance are hot when operated, so do not touch with hand. Use handles or knobs only.
    Do not leave the appliance on unattended.
  14. The environment temperature of operating or storing shall be more than 0 degree Celsius.
    Do not leave the appliance exposed to atmospheric agents (sun, rain and so on).
    Do not remove the water reservoir until unit is turned off.
  15. This appliance is not intended to be operated by means of an external timer or separate remote-control system.
  16. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  17. Children should be supervised to ensure that they do not play with the appliance.
  18. This appliance has been incorporated with a grounded plug. Please ensure the wall outlet in your house is well earthed.
    Do not use appliance for other than intended use.
    Do not use outdoors or for commercial purpose.
    Do not use outdoors.
  19. This appliance is intended to be used in household and similar applications such as:
  • Staff kitchen areas in shops, offices and other working environments;
  • Farm houses;
  • By clients in hotels, motels and other residential type environments;
  • Bed and breakfast type environments.
  1. Save these instructions.

PREPARING ESPRESSO

  1. Fill the detachable water reservior with drinking water. The water level should not exceed MAX level marked on the reservior.
  2. Open the handle by lifting it and insert a coffee capsule. Close the handle by pushing it down directly.
  3. Note: Only use Nespresso capsules for the appliance.
  4. Plug the power cord into the outlet. Press the power switch to "I" position and then all the indicators start to flash. CAUTION: During brewing, never open the handle. Otherwise the coffee capsule will be expelled into the capsule collection container.
  5. Position a container on the cup holder grid. Make sure the drip tray is assembled in place.
  6. Once all the indicators light steadily, press the large cup or small cup coffee button according to your demand, and then its corresponding indicator starts to flash, after a while, coffee will flow out from the coffee outlet. Once the desired quantity has been reached, the coffee will stop flowing out automatically and the all the indicators will light steadily.
    NOTE: The appliance will enter into the standby mode and all the indicators will be extinguished if no any operation within 4 minutes after all the indicators light steadily.
    NOTE: Coffee quantity of small cup is ranged between 30ml and 35ml while the coffee quantity of large cup is ranged between 60ml and 70ml.
    NOTE: During brewing process, you can cancel the coffee brewing process by pressing your selected coffee button once. To restart the brewing process, just need to press the button again.
  7. During brewing process, all the indicators will flash quickly if there is lack of water in the water reservior. At that time, you shall refill the water reservior.
  8. After it, press any button to make the indicators stop flashing and then press the corresponding button to restart the brewing process.
  9. Once you have finished brewing coffee, always expel the capsule. Capsules are automatically expelled into the capsule collection container by opening the handle.
  10. CAUTION: Never open the handle during brewing cycles.
    NOTE: The appliance will enter into the standby mode and all the indicators will be extinguished if no any operation within 4 minutes after the appliance finishes brewing coffee. If you want to brew coffee again, firstly, make sure that the plug is connected well with the power source and the power switch is at "I" position, and then press any button, after it, the appliance will continue to brew coffee.
  11. If you want to another cup, insert a new capsule for operating.
  12. Empty the capsule collection container and rinse the unit and reservior frequently.
  13. Always turn the coffee maker off and disconnect the power supply when not use.

PREPARING CAPPUCCINO

  1. Fill the detachable water reservior with drinking water. The water level should not exceed MAX level marked on the reservior.
  2. Move the milk reservior by following the arrow " " marked on the milk reservior lid and fill the milk reservior with milk (grease content >3%, temperature: 4-8 degree Celsius) to the "Cappuccino" mark on the milk reservior. After it, replace the milk reservior well on the milk reservior holder by following the arrow " " marked.
  3. Open the handle by lifting it and insert a coffee capsule. Close the handle by pushing it down directly.
  4. Note: Only use Nespresso and Donlim capsules for the appliance.
  5. Plug the power cord into the outlet. Press the power switch to "I" position and then all the indicators start to flash. CAUTION: During brewing, never open the handle. Otherwise the coffee capsule will be expelled into the capsule collection container.
  6. Position a container on the cup holder grid. Make sure the drip tray is assembled in place.
  7. Once all the indicators light steadily, press the "Cappuccino" button and its indicator starts to flash for some time, and then the machine starts to froth milk.
  8. After finish frothing, all the indicators light steadily.
  9. Pour appropriate amount of frothed milk into the container. After it, press the small cup or large cup based on your requirement and then its corresponding indicator starts to flash, after a while, coffee will flow into the container from the coffee outlet. Once the desired quantity has been reached, the coffee will stop flowing out automatically and the all the indicators will light steadily.
    NOTE: The appliance will enter into the standby mode and all the indicators will be extinguished if no any operation within 4 minutes after all the indicators light steadily.
    NOTE: During brewing process, you can cancel the coffee brewing process by pressing your selected coffee button once. To restart the brewing process, just need to press the button again.
  10. During brewing process, all the indicators will flash quickly if there is lack of water in the water reservior. At that time, you shall refill the water reservior.
  11. After it, press any button to make the indicators stop flashing and then press the corresponding button to restart the brewing process.
  12. Once you have finished brewing coffee, always expel the capsule. Capsules are automatically expelled into the capsule collection container by opening the handle.
  13. CAUTION: Never open the handle during brewing cycles.
    NOTE: The appliance will enter into the standby mode and all the indicators will be extinguished if no any operation within 4 minutes after the appliance finishes brewing coffee. If you want to brew coffee again, firstly, make sure that the plug is connected well with the power source and the power switch is at "I" position, and then press any button, after it, the appliance will continue to brew coffee.
  14. If you want to another cup, insert a new capsule for operating.
  15. Empty the capsule collection container and rinse the unit and reservior frequently.
  16. Always turn the coffee maker off and disconnect the power supply when not use.

PREPARING LATTE

  1. Fill the detachable water reservior with drinking water. The water level should not exceed MAX level marked on the reservior.
  2. Move the milk reservior by following the arrow " " marked on the milk reservior lid and fill the milk reservior with milk (grease content >3%, temperature: 4-8degree Celsius) to the"Latte" mark on the milk reservior. After it, replace the milk reservior well on the milk reservior holder by following the arrow " " marked.
  3. Open the handle by lifting it and insert a coffee capsule. Close the handle by pushing it down directly.
    Note: Only use Nespresso and Donlim capsules for the appliance.
  4. Plug the power cord into the outlet. Press the power switch to "I" position and then all the indicators start to flash.
  5. CAUTION: During brewing, never open the handle. Otherwise the coffee capsule will be expelled into the capsule collection container.
  6. Position a container on the cup holder grid. Make sure the drip tray is assembled in place.
  7. Once all the indicators light steadily, press the "Latte" button and its indicator starts to flash for some time, and then the machine starts to froth milk. After finish frothing, all the indicators light steadily.
  8. Pour appropriate amount of frothed milk into the container. After it, press the small cup or large cup based on your requirement and then its corresponding indicator starts to flash, after a while, coffee will flow into the container from the coffee outlet. Once the desired quantity has been reached, the coffee will stop flowing out automatically and the all the indicators will light steadily.
    NOTE: The appliance will enter into the standby mode and all the indicators will be extinguished if no any operation within 4 minutes after all the indicators light steadily.
    NOTE: During brewing process, you can cancel the coffee brewing process by pressing your selected coffee button once. To restart the brewing process, just need to press the button again.
  9. During brewing process, all the indicators will flash quickly if there is lack of water in the water reservior. At that time, you shall refill the water reservior. After it, press any button to make the indicators stop flashing and then press the corresponding button to restart the brewing process.
  10. Once you have finished brewing coffee, always expel the capsule. Capsules are automatically expelled into the capsule collection container by opening the handle.
  11. CAUTION: Never open the handle during brewing cycles.
    NOTE: The appliance will enter into the standby mode and all the indicators will be extinguished if no any operation within 4 minutes after the appliance finishes brewing coffee. If you want to brew coffee again, firstly, make sure that the plug is connected well with the power source and the power switch is at "I" position, and then press any button, after it, the appliance will continue to brew coffee.
  12. If you want to another cup, insert a new capsule for operating.
  13. Empty the capsule collection container and rinse the unit and reservior frequently.
  14. Always turn the coffee maker off and disconnect the power supply when not use.

Frothing milk only

  1. Move the milk reservior by following the arrow " " marked on the milk reservior lid and fill the milk reservior with milk (grease content >3%, temperature: 4-8 degree Celsius) to the "Latte" mark on the milk reservior. After it, replace the milk reservior well on the milk reservior holder by following the arrow " " marked.
  2. And you can add some ingredients such as chocolate powder into the milk reservior if you like.
  3. Press "Froth" button and then the appliance starts to froth the milk only.
  4. The appliance will stop working after finish frothing.

CLEANING AND MAINTENANCE

Be sure to unplug this appliance and cool down before cleaning. To protect against electrical shock, do not immerse cord, plug or unit in water or liquid. After each use, always make sure plug is first removed from wall outlet. We recommend that the following is performed on a periodical basis:

  1. Use a dry cloth to wash the removable water reservior.
  2. Empty the capsule collection container and clean it.
  3. Clean the capsule holder with a dry cloth.
  4. Use a damp cloth to gently wipe the cup holder grid.
  5. Clean the machine using a damp cloth, never submerge the machine.
  6. Replace all parts and keep for next use.

REMOVING MINERAL DEPOSITS

To keep your coffee maker operating efficiently, you should clean away the mineral deposits left by the water regularly according to the water quality in your area and the frequency use the appliance, the detail is as follows:

  1. Fill the water reservior with water and descaler to the MAX level in the gauge of coffee maker (the scale of water and descaler is 4:1, the detail refers to the instruction of descaler. Please use "household descaler", you can use the citric acid instead of the descaler (the one hundred parts of water and three parts of citric acid).
  2. Press the power switch to "I" position and all the indicators start to flash, wait until the indicators light steadily.
  3. Make sure the handle is closed in place.
  4. Position a container on the cup holder grid.
  5. Press the large cup or small cup coffee button and allow the liquid to flow. Once the desired quantity has been reached, the water will stop flowing out.
  6. Wait for 20 minutes with the machine turned on.
  7. Press the large cup or small cup coffee button until all of the water is used up.
  8. Rinse the reservior well and fill with clean water. Press the large cup or small cup coffee button until all of water is used up.