FIBARO Z-Wave Universal Sensor, Home Automation Smart Device

TheFibaro Z-Wave Universal Sensoris a wireless module that allows sensors with a binary output to communicate with the wireless Z-Wave network.

This item has been discontinued and replaced by The FIBARO Implant

• Supports four DS18B20 temperature sensors
• Compatible with regular and parametric alarm lines (up to 2 alarm detectors)
• Inputs: 2 potential-free inputs, 1 digital 1-wire input
• Outputs: 2 potential-free outputs

Product Details

TheFibaro Z-Wave Universal Sensoris a wireless module that makes it possible to improve the functionality of any sensor with a binary output by allowing it to communicate with the wireless Z-Wave network and the Z-Wave Gateway. Moreover, the module allows for wireless communication between the system and the DS18B20 temperature sensors. The device can serve up to two binary sensors and up to four DS18B20 temperature sensors.

The Fibaro Z-Wave Universal Sensormay be used whenever a wireless collection of data from wired sensors is required. Once additional safety housing has been installed, the device can also be used in areas with high humidity and high temperature.

TheFibaro Z-Wave Universal Sensor's main function is the integration of the wireless Z-Wave System with the existing wire-based and wireless alarm and measurement systems.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

• Vera Edge/3/Lite
• Fibaro Home Controller 2/Lite
• DHS Z-Wave Universal Remote Controller

Please check the maximum load before installing/operating.
This installation must be done by a certified electrician in Australia and New Zealand.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim, you have to provide an installation compliance certificate from your electrician.

Product Support

Manuals:

⇒Fibaro Z-Wave Universal Sensor Manual

Videos / YouTube:

⇒Fibaro Home Center 2 Presentation

Technical Specifications

RF Protocol

Z Wave (Multilevel Command Class)

RF Frequency

921.42Mhz AU/NZ approved RF for Z wave

Z Wave device type

Z-Wave binary sensor, slave

Power

9 - 30V DC 10%

Max. Current of Outputs

150mA

Operation Range

Up to 20m indoors with no obstacles

Application

Indoor use only

Measurement Range

-55C ~ 126oC

Operation Temperature

0 ~ 40 oC

Storage Temperature

10 ~ 80 oC

Weight

40g

Compliance

C-Tick N27640

Regulatory Compliance Mark

N5496

Dimensions

(LxWxH) 14.5mm x 27.3mm x 12mm