GE MWF/GWF01-GE MWF/MWFP Compatible Fridge Water Filter 2 Pack.

GE

THIS COMPATIBLE FRIDGE FILTER FOR GE REPLACES OR COMPATIBLE WITH THE FOLLOWING FRIDGE FILTER PARTS NUMBERS:

GE SmartWater GWF, GWFA, GWF01, GWF06, MWFA, HWF, HWFA, SGF-G9, GER-100, ETC.

THIS COMPATIBLE FRIDGE FILTER FOR GE REPLACES OR COMPATIBLE WITH THE FOLLOWING FRIDGE MODEL NUMBERS:

PFCA1NJZDSS,PSG25SGMHCBS, GCE21MGTAFSS , GCE21MGTAFSS, GCE21MGTBFSS, GCE21MGTBFSS, GSE25MGTBCSS, GSE25MGTBCSS, GSE25MGTECSS, GSE25MGTECSS, GSG25IB, GSG25IW, GSG25MIPFWW/BB, PCE23NHTAFSS, PCG21IBS, PCG21SIMFBS, PCG23IBS, PCG23SHMFBS, PCG23SHMFBS, PCP23, PFSA5NJZDSS, PIE23NGTAFBB, PIE23NGTAFKB, PIG21IBK, PIG21MIMFKB, PJE25PGTAFKB, PJE25PGTAFSV, PSE25SGTACSS, PSE29NHTACSS, PSE29NHWACSS, PSG22IBS, PSG22SIPFBS, PSG25IBS, PSG25SGMCBS, PSG29IBS, PSG29SHMCBS,PSE29NHWICSS, PSG25SGMFCBS , ZSGS420DMASS, GCE21XGYDFLS,PSE25SGTCSS, PSG29SHSBCSS,PSG29SHSACBS GCE21XGYBFLS, WR02X11020, ETC.

  • NSF42 Certified by WQA.
  • Remove Chlorine, color, odor, Voc, THM’s, etc.Chlorine Reduction Rate tested by WQA is 99.06%
  • Remove Pesticides and Herbicides. Tested by the third-party lab according to NSF53.
    √ Lindane Reduction Rate>95%
    √ Atrazine Reduction Rate>85%
    √ 2.4-D Reduction Rate >86%
    √ Toxaphene Reduction Rate>90%

Compatible CodesKENMORE --- 46-9991; 46 9991; 469991; 9991; 46-9996; 46 9996; 469996; 9996GE --- MWF; MWFP; MWF3PK; MWFA; MWFAP; MWFINT; GWF; GWF01; GWF06; GWFA; HWF; HWFA; FMG-1HOMEDEPOT --- FMG-1AQUA FRESH --- WF287SWIFT GREEN --- SGF-G1WATER SENTINEL--- WSG-1;WSA-1BRITA --- GERF-100 ;

Installation Instruction1). On models without a replacement indicator light, apply the month sticker to the new cartridge and mark your calendar to remind you to replace the filter after six months2). Remove old filter cartridge by grasping and turning to the left about 1/2 turn3). Remove the protective foil from the end of the new filter. Fill the replacement filter with a little water from the tap to allow for better flow immediately after installation.4). Place the top of the new cartridge up inside the cartridge holder. Slowly turn the filter to right until the filter cartridge stops. Do not over tighten. As you turn the cartridge it will automatically raise itself into position. The cartridge will move about 1/2 turn.5). Run water from the dispenser for 6-8 minutes (about 3-4 gallons) to clear the system and prevent sputtering6). On models with a replacement indicator light, press and hold the RESET WATER FILTER PAD on the dispenser