Hot & Cold Thermal Controller For Fan And Heater - Hydroponic Accessory

Dual Temperature Controller For Fan And Heater

• Take control of your lighting and give your plants the right temperature at the right time to ensure maximum yield.
• Turns your system automated to only turn on at the right temperature
• Waterproof tip, allowing it to also be used in conjunction to control the temperature of nutrient tanks etc

OPERATION INSTRUCTIONS:

In summer, plug your cooling fan in the socket "COOL(FAN)" and adjust room temperature controller to required temperature, say 20oC. If the room temperature is up to 20oC or above, the electric fan which is plugged into the socket "COOL(FAN)" outlet on the Thermal Controller unit will be automatically switched on. When the room temperature is dropped below 20oC, the fan will be automatically stopped! The stainless steel temperature sensor pole should be always kept away from the cooling device, and measures external free air and room temperature.

In winter, plug your heating device in the socket "WARM(HEATER)" and adjust room temperature controller to required temperature, say 20oC. If the room temperature is below 20oC, the electric heater which is plugged into socket "WARM(HEATER)" outlet on the Thermal Controller unit will be automatically switched on. When the room temperature is up to or above 20oC, the heater will be automatically stopped! The stainless steel temperature sensor pole should be always kept away from the heating device, and measures external free air and room temperature.