Jaw Swage Rigging Screw Long Screw Eye LRTT - TImber, Over 10M (LR), 4-0mm

Low Cost Wire
Jaw Swage Rigging Screw Long Screw Eye LRTT - TImber, Over 10M (LR), 4-0mm
Jaw Swage Rigging Screw Long Screw Eye LRTT - TImber, Over 10M (LR), 4-0mm
Jaw Swage Rigging Screw Long Screw Eye LRTT - TImber, Over 10M (LR), 4-0mm
Jaw Swage Rigging Screw Long Screw Eye LRTT - TImber, Over 10M (LR), 4-0mm
Jaw Swage Rigging Screw Long Screw Eye LRTT - TImber, Over 10M (LR), 4-0mm
Jaw Swage Rigging Screw Long Screw Eye LRTT - TImber, Over 10M (LR), 4-0mm
Shop all Other

This kit includes fittings suitable for a run of wire of 10 meters or more(hence the LR or Long Run) and over as there are dual tensioning points. Use this kit with the 6x60mm Lag Eye Screws to attach directly into timber posts (hence the TT) (soft or hardwood).

Jaw Swage Rigging Screw Long Screw Eye LRTT

Jaw Swage Rigging Screw Long Screw Eye LRTT Kit suits a run of wire of 10 meters or more (hence the LR or Long Run). There is a Jaw Swage Rigging Screws to provide a single tensioning point. There are two 6x75mm Lag Eye Screws that form two attachment points. These attach directly into softwood or hardwood timber posts (hence the TT or Timber to Timber).

Application

Both ends of the run have Jaw Swage Rigging Screws swaged to the wire which are adjustable. The attachment points are Long Screw Eyes which are secured to timber posts or walls. The Jaw Swage Rigging Screws are simply attached to the 6mm x 75mm Lag Screw Eyes.

Wire may be installed through the intermediate posts and 'cut to length'. Drill the intermediate posts out to at least 4mm prior to swaging in place. Before swaging, please expand all of the tensioners so that the maximum adjust-ability is available.

Alternately, if you build the wire before you install it, then the length of a wire run is determined by the 'inside to inside' post measurement less a fixed amount which represents the distance between the attachment posts 'taken up' by the fittings when installed and adjusted properly. We recommend cutting, building, installing and reviewing your installation to ensure that it looks the way YOU want it to look once its complete

Contents

  • 2 - Jaw Swage Rigging Screw Stainless Steel 316 Marine Grade
  • 2 - 6mm x 75mm Lag Eye Screws Stainless Steel 316 Marine Grade

Characteristics

  • Balustrade Kit for 1 Runs/Wire
  • Post Connections TT (Timber to Timber
  • Recommended Run Length >=10M (LR)
  • Swaging Method: Hydraulic
  • Wire Structure: 7x7, 1x19
  • Diameter of Wire: 2.4mm, 3**.2mm or 4.0mm**
  • Section Orientation: Flat, Stairs, Angle
  • Wire Orientation in a Section: Horizontal, Vertical