Kingston HyperX Fury 16GB (1 x 16GB) DDR4-2666MHz CL16 - Black (Intel XMP, AMD Ryzen) HX426C16FB/16

HyperX HX426C16FB/16 is a 2G x 64-bit (16GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

  • JEDEC/PnP: DDR4-2666 CL16-18-18 @1.2V
  • XMP Profile #1: DDR4-2666 CL16-18-18 @1.2V
  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP = 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Dual-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • Height 1.340" (34.04mm), w/heatsink

CL(IDD) 16 cycles Row Cycle Time (tRCmin) 45.75ns(min.) Refresh to Active/Refresh Command Time (tRFCmin) 350ns(min.) Row Active Time (tRASmin) 29.25ns(min.) Maximum Operating Power TBD W* UL Rating 94 V - 0 Operating Temperature 0degC to +85degC Storage Temperature -55degC to +100degC

Kingston HyperX Fury 16GB (1 x 16GB) DDR4-2666MHz CL16 - Black (Intel XMP, AMD Ryzen) HX426C16FB/16

 
$146.25

Marketplace - Est. delivery between Fri 1 Oct - Tue 5 Oct
Marketplace - Est. delivery between Fri 1 Oct - Tue 5 Oct
Sold and delivered by F Digital (Shipped from Overseas)