Oricom Uhf300 Uhf Micro 5 Watt 80Ch Cb Radio+6.5Dbi Antenna Pk

Oricom Uhf300 Uhf 80 Channel Micro 5 Watt Radio+anu200 6.5dbi Fibreglass Uhf Antenna+ Z Mount Bracket Package Limited Stock

Whats Included With This Pack:

  • Uhf300 Uhf Radio
  • Heavy Duty Microphone With Volume Control
  • Microphone Hanger
  • Dc Power Cord Cable
  • Mounting Bracket for the Uhf
  • Owners Manul
  • Oricom Anu200 Uhf 6.5dbi Antenna
  • Oricom Z Mount Stainless Steel

Flip feature with different colour screen

Key Features :

• 5.0 Watts (max TX power)

• 80 Narrowband Channels*

• Ultra compact micro size

• Flip LCD function

• Automatic level control (ALC) for consistant audio levels

• Heavy-duty microphone with volume control

• 38 CTCSS and 104 DCS Codes

• 7 Colour backlit display

• Duplex (range extender)

• Open/Group Scan

• Priority channel

• Rotary channel select

• Digital squelch control

• Busy channel lockout

• Die cast metal chassis with integrated heat sink

• Optional external speaker (3.5mm jack)

• Requires external antenna (not supplied)

• Dimensions of transceiver: 22.5(h) x 100 (w) x 84 (d) mm

  • Designed and engineered in Korea
  • UHF300 Technical Specification
  • Compliance AS/NZS 4365:2011
  • Frequency Range 476.425 - 477.4125 MHz
  • Number of TX/RX Channels 80 UHF CB (75 Voice channels)
  • Channel Spacing TX/RX 12.5KHz
  • Operating modes Simplex, Repeater TX offset (+750kHz)
  • Scanning Speed 130 msec per channel
  • Automatic Level control (ALC) For consistant audio levels
  • Antenna Impeadance 50 Ohms
  • Operating Volts nominal 13.8 VDC
  • Operating Volts Range 10 to 15 VDC
  • Over Voltage Protection voltage regulator
  • Over Current Protection 2 Amp fuse
  • Reverse Polarity Protection Series diode
  • Frequency Stability +/- 2.5ppm

Transmitter

  • RF Output Power 5watts max.
  • Modulation F3E (FM)
  • Maximum Deviation 2.5KHz
  • Spurious Emissions < -70 dBc
  • TX Audio pre-emphasis + 6dB/octave from 300Hz to 3kHz
  • Current Consumption during TX 1.5 Amps with 50 Ohm antenna termination

Reciever

  • Circuit Type Dual conversion superheterodyne
  • IF Frequencies 1st IF = 21.4MHz , 2nd IF = 450kHz
  • Current Consumption during RX 200mA
  • Sensitivity < -121 at 12dB SINAD
  • Selectivity +/-3.75kHz min @ 3dB to +/-15kHz max @ 40dB
  • Intermodulation Immunity > 70dB
  • Spurious Immunity > 70dB
  • Audio Output Power 3 Watts Maximum
  • RX Audio de-emphasis -6dB/octave 300Hz to 3kHz
  • Audio frequency response 300Hz to 3kHz
  • External speaker jacks for optional 8 Ohm mono speaker (3.5mm jack)

UHF 477MHz CB 6.5DB Gain Antenna 950mm in height

5M OF CABLE, RG58 FME Socket Terminated with UHF Adaptor

Heavy Duty Spring Mounted with Elevated Base and 4.3 Metre Cable

A 6.5dbi antenna with elevated feed, counter balanced spring and solid black fiberglass whip. This unit include 4.3m of low-loss coaxial cable and a PL259 connector.

Use:
This antenna configuration is by far the most popular on the Australian market. Ideal for use in four-wheel drives, or for vehicles with diesel engines. The heavy duty spring is designed to absorb the vibrations from the engine and/or rough corrugated roads for better performance.

This antenna allows for a variety of mounting options from bullbar, gutter to wing mount. A specific bracket will be required depending on the mounting option chosen (bracket not supplied). The 6.5dBi high-gain low SWR antenna gives the best "all-round" transmit and receive performance.

Key Features:

  • Ground Independent
  • Solid Construction
  • Interchangeable Top Antenna
  • 4.3m Of Cable + PL259 Connector
  • Stainless Steel, PVC & Brass
  • 6.5dB gain
  • SWR < 1.5 to 1 over 12Mhz
  • No tuning Required
  • Made in Australia
  • 5 Year Warranty
  • 950mm in height