Red Smoke Alarms 240V Smoke Alarm with 9V Battery Back-Up

Model No: R240

PLEASE NOTE-THIS ALARM IS ONLY TO BE INSTALLED BY A LICENSED ELECTRICIAN. A photoelectric, 240v (hard wired) smoke alarm with a 9v battery back up. Interconnectable with up to 40 Red smoke alarms and includes a test/hush button and visual indicators. Can be wirelessly interconnected with the addition of the Red RF wireless base. The R240 smoke alarm is approved and certified to meet AS3786:2014 and is fully compliant to meet the Queensland 2022 smoke alarm legislation. When the Red RF wireless base is used with this alarm, the Red Smoke Alarm Controller can connect wirelessly to this smoke alarm.

Data Sheet R240

Key Information

• Rated Supply Voltage: 220...240 V AC
• Backup Type: Battery
• Battery Life: 1 Year
• Output Voltage Limits: Interconnection : 6.5...20V
• Low battery at 6.9... 7.5V
• Detection Type: Smoke
• Function Available: Hush Function;Self-test of smoke detection;Local alarm.
• Control Type Button: for test/ hush function
• Number of Devices: Up to 40 pieces
• Operating Distance: N/A indoor use line of sight;140m in free field
• Response Time: Approx. 8s
• Noise Level: 85 dB at 3m minimum
• Time Delay Range: 10 min for hush;10 hr for do not disturb
• Local Signal Sound : Alarm; Sound : Signal;Visual : 1 LED (red) for warning and low battery;Visual : 1 LED (green) for ON status
• Type of Installation: Indoor
• Device Mounting: Surface
• Mounting Support: Wall-mount ;Ceiling
• Fixing Mode: By screws
• Diameter: 140 mm
• Height: 55 mm

Environment

• Ambient Air Temperature for Operation 0...45oC
• Relative Humidity 5...95%
• Product Certifications SAI
• Standards AS 3786 : 2014 / amdt 2:2018

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability of reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant
specific application or use thereof.
Neither Red Smoke Alarms PTY. LTD nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.