Sansai USB Powered RGB LED Light TV Backlight Strip Lights w/ Remote Control
Sansai USB Powered RGB LED TV Backlight is ideal for computer light, TV backlight, accent lighting, patio lighting, auto lighting.
Installation Instructions:
- Clean the surface you intend to stick the light strip
- Peel off the backing strip off the 3m adhesive tape
- Press and hold the light strip firmly against the surface
- Connect the Pin and Wire mounting clips one by one.
Package Included:
- 4 x LED strip light (4x 50CM)
- 1 x 24-key IR Remote
- 6 x 4pin connectors
- 3 x strip connector cable
Specs:
- LED Type: SMD 5050
- Light Colour: RGB
- Length: 4 x 0.5 meters
- LED density: 15LEDs/strip, 60LEDs/set
- Power Supply: USB 5V (not included)
- Waterproof Rating: Waterproof IP65
- Viewing Angle: 120°
- Working Temperature: -20°c℃ to 50°c
- With 24Key Remote Controller
- Control Distance: 8-12 meters
- Mode & Pattern: 20 colors 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change
Upgrade sponge tape with easy to tear design, make it firmly sticky and hardly fall down, sticks solidly to the back,
WARNING — KEEP BATTERIES OUT OF REACH OF CHILDREN
-
Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the esophagus.
-
If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 for fast, expert advice.
-
Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if the compartment is not secure.
-
Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
-
Tell others about the risk associated with button batteries and how to keep their children safe.