Z-Wave Dim Clipsal Impress Z-wave Switch Package, Qubino Module, Press
Z-Wave Dim Clipsal Impress Package / Combo Quick Overview
Note: This is an updated version of the Z-Wave Dimmer Lighting Set with improved functionality.
This set allows you to control a single lighting circuit with Z-Wave. It allows for remote control using a connected Z-Wave gateway or manual control using the momentary/push button. The set contains:
- One GOAP Z-Wave Dimmer InWall Controller
- One Clipsal 1 Gang Impress Series Wall Plate
- One Clipsal Impress momentary/push button
The GOAP Z-Wave Dimmer InWall Controller includes additional features compared to the previous dimmer used in this set. It uses the latest 500 Series Z-Wave chip, has a greater communication range and is fully integrated with Vera ADD Wizards as "Qubino Flush Dimmer ZMNHDD1". It also allows for 2-3 way wired switching.
An LED option is available for the Clipsal buttons. The LED is always on and helps you to locate the button in the dark.
Note: This product must be installed by a qualified electrician.
Product Support Manuals:
⇒ GOAP Z-Wave Dimmer InWall Installation Manual
⇒Guide to Configuring Z-Wave Devices with Vera UI7 (Size: 435 kB)
Dimmer Technical Specifications RF Protocol Z-Wave Plus(TM) , SDK version: 6.51.03 RF Frequency 921.42Mhz AU/NZ approved RF for Z wave Application Indoor use only Power 0.6 A / 230 VAC 0.85 A / 30 VDC Operation Range 50m with no obstacles Enclosure ABS Compliance EN 60669-2-1 Operating Temp. -10C ~ +40C Dimensions 41.8mm x 36.8mm x 15.4mm