4m Complete Standard Sliding Gate Hardware Kit
Kit Includes
- Singular 78mm Recess Mount Wheels(QTY: 2)
- 1m Galvanized Sliding Gate Track(QTY: 8)
- 100mm Roller(QTY: 2)
- 165x110mm Galvanized Bracket(QTY: 1)
- 70mm Galvanized U Guide Gate Receiver Catcher(QTY: 1)
- 115mm High Bolt Down Anodized Gate Stop(QTY: 1)
Product Information
78mm Recess Wheels
- R10 profile to suit the entire range of APC Galvanized profile tracks
- Dual bearing system for the capacity of 250KG per wheel (500kg per pair)
- Fits into 75mm height tubing wit a cut out size to fit the wheel of 80x35mm
- Raises the gate by 40mm when installed with the floor track
- Easy installation with pre-punched fixings, just drops into place after cut out and screws to the tubing from the flanged sides
100mm Roller and Bracket Set
- 165mm Long Galvanized steel construction for long life outdoor use
- 100mm nylon rollers with completly adjustable positions
- 75mm internal clearance between rollers at full span, allowing for 25mm ajustment for the gate a gate thickness not exceeding 50mm is ideal (see 200mm long bracket to allow 85mm gate thickness)
- Pre-punched fixing holes ideal for adjustments prior to final fixing
Bolt Down Galvanized Floor Track
- R10 profile to suit the entire range of APC recess and flat mount wheels
- Rounded profile provides the least resistance for sliding gate movment over the alternative "V groove"
- High strength 3mm steel, Galvanized for complete long life outdoor use
- Pre-punched fixing holes ready for anchor nails (Supplied)
- Easy to install, bolts down to concrete! No need to set in during concreting
70mm U Guide
- Galvanized steel construction for long life outdoor use
- Flared entry to guide gate into the reciever in case of wind loads pushing the gate
- 70mm internal clearance ideal for standard steel or aluminum gates gates that are offset from the closing post or clad gates no greater than 65mm thickness
- Pre-punched fixing holes ideal for adjustments prior to final fixing
Anodized Gate Stop
- Anodized steel construction for long life outdoor use
- 115mm Height
- 40mm Rubber bumper
- Solid 100x80mm base
- Pre-punched 10mm fixing holes