12/24V 30A Solar Charge Controller With USB

This 30A Input 12/24V Solar Charger is suitable for permanent installations of lead acid, gel battery and lithium chemistry (including Li-NiCoMn & LiFePO4) solar panel systems. LEDs are provided to indicate working status - solar charge ON, load ON and battery level. Suitable for 12V or 24V systems, the charger automatically detects the connected battery voltage. Ideally suited to vehicles and simple remote power systems such as pumping stations, electric fences, remote lighting, marine applications etc.
Dimensions: 132 x 69 x 28mm.

Suits lead acid type batteries
Suits lithium chemistry batteries, including Li-NiCoMn & LiFePO4.
Display interface automatically switches
Can set daytime start, night off mode
System voltage automatic identification
Intelligent PWM charging method
Temperature compensation function
Light control and time control mode
Load output: battery voltage + 12V DC + 5V USB
Overload, short circuit protection
Reverse battery connection, under voltage protection

Max charging current: 30A
Max discharge current: 30A
Max solar input voltage: ≤55V
USB Output: LOAD + 12V d.c. 2A + 5V 2A USB
No-load loss: ≤10mA
Temperature compensationL -3mV/cell/°C
Working Temperature: -20°C ~ 60°C
Dimensions: 132 x 69 x 28mm

Lead Acid Charging Parameters 12V/24V
Nominal input voltage: 12V/24V
PV charge cut-off voltage: 14.5V/29V
Battery discharge cut-off voltage: 10.5V/21V
Recovery discharge voltage: 12V/24V

Ternary Lithium Charging Parameters 12V/24V
Nominal input voltage: 11.1V/22.2V
PV charge cut-off voltage: 12.6V/25.2V
Battery discharge cut-off voltage: 9V/18V
Recovery discharge voltage: 11.1V/22.2V

Lithium-Iron Phosphate Charging Parameters 12V/24V
Nominal input voltage: 12.8V/22.2V
PV charge cut-off voltage: 14.6V/29.2V
Battery discharge cut-off voltage: 11.2V/22.4V
Recovery discharge voltage: 12.8V/25.6V