12V Oil Diesel Extractor Suction Pump Transfer Fluid Change Heavy Duty Car Boat
Product Description:
-This oil extractor transfer pump uses 12v mini self-priming pump to exchange car engine oil. It works by connecting the clamps to the 12V car-battery, and widely used in general industrial equipment, cause this pump can pump oil not only, also can pump hydraulic oil and other liquid. It is an ideal equipment for quick and clean oil-changes.
Features:
-Widely used in general industrial equipment.
-It works by connecting the clamps to the 12V car-battery.
-An ideal equipment for quick and clean oil-changes.
-Simple on and off power switch, easy to use.
How to use:
-Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.
-Connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal.
-Open the filler cap, get dipstick out, force the tube into the bottom of the joint, until the tube does not move, then put the inlet pipe from the oil dipstick into in end the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely, as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.
-After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean.
-If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.
Specifications:
-Rated Voltage: DC 12V
-Rated Power: 60W
-Maximum Pressure: Max. 0.8MPA
-Maximum Flow: 5L per min
-Pump Diameter: Approx. 4.8cm or 1.89in
-Length: Approx. 14.5cm or 5.7in
-Outlet Pipe Size Dia. x L: Approx. 11mm x 140cm or 0.43in x 55in
-Inlet Pipe Diameter: Approx. 8mm and 6mm or 0.31in and 0.24in
-Inlet Pipe Length: Approx. 100cm or 39.37in
-Cable Length: Approx. 30cm or 11.8in
-Clips Length: Approx. 8cm or 3.15in
-Colour: Black
-Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
Note:
-If you want to connect this pump to AC power, you will need a power converter.
-Please use when the engine is warm, the engine oil is warm and viscosity is lower, this will be easier and faster to pump.
-This product is not allowed to pump corrosive liquids, strong acids and strong alkaline liquids.
Package Inclusions:
-1 x Oil Pump
-1 x 11mm Outlet Pipe
-1 x 8mm Inlet Pipe
-1 x 6mm Inlet Pipe
-2 x Clips
Notes:
-Actual colors may vary due to computer monitors displaying colors differently.
-Due to the nature of the manufacturing process and manual measurement, product sizing may vary slightly.
-This oil extractor transfer pump uses 12v mini self-priming pump to exchange car engine oil. It works by connecting the clamps to the 12V car-battery, and widely used in general industrial equipment, cause this pump can pump oil not only, also can pump hydraulic oil and other liquid. It is an ideal equipment for quick and clean oil-changes.
Features:
-Widely used in general industrial equipment.
-It works by connecting the clamps to the 12V car-battery.
-An ideal equipment for quick and clean oil-changes.
-Simple on and off power switch, easy to use.
How to use:
-Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.
-Connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal.
-Open the filler cap, get dipstick out, force the tube into the bottom of the joint, until the tube does not move, then put the inlet pipe from the oil dipstick into in end the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely, as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.
-After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean.
-If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.
Specifications:
-Rated Voltage: DC 12V
-Rated Power: 60W
-Maximum Pressure: Max. 0.8MPA
-Maximum Flow: 5L per min
-Pump Diameter: Approx. 4.8cm or 1.89in
-Length: Approx. 14.5cm or 5.7in
-Outlet Pipe Size Dia. x L: Approx. 11mm x 140cm or 0.43in x 55in
-Inlet Pipe Diameter: Approx. 8mm and 6mm or 0.31in and 0.24in
-Inlet Pipe Length: Approx. 100cm or 39.37in
-Cable Length: Approx. 30cm or 11.8in
-Clips Length: Approx. 8cm or 3.15in
-Colour: Black
-Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
Note:
-If you want to connect this pump to AC power, you will need a power converter.
-Please use when the engine is warm, the engine oil is warm and viscosity is lower, this will be easier and faster to pump.
-This product is not allowed to pump corrosive liquids, strong acids and strong alkaline liquids.
Package Inclusions:
-1 x Oil Pump
-1 x 11mm Outlet Pipe
-1 x 8mm Inlet Pipe
-1 x 6mm Inlet Pipe
-2 x Clips
Notes:
-Actual colors may vary due to computer monitors displaying colors differently.
-Due to the nature of the manufacturing process and manual measurement, product sizing may vary slightly.
‘Don’t Pay’ is the recommended retail price provided by the supplier or obtained from the manufacturer, or is the recently advertised price for the same product on a different or competing online platform or store. Catch may not have previously sold the product at the ‘Don’t Pay’ price.