350 GPH BOAT - BILGE PUMP + HOSE KIT + FLOAT SWITCH - 12V 3/4' SUBMERSIBLE WATER

350GPH Boat Bilge Pump

+ 3/4 Bilge Pump Hose Kit

+ Automatic Float Switch

This is a high quality boat bilge pump. Perfect for boats from 8ft up to 30ft. It's compact so it can fit into small spaces. Its easy to install. Comes with tinned wire tails for more resistance against salt water & corrosion.

It can also be used in live boat tanks, to fill the tanks up or use it as a circulation pump to keep your bait alive.

This listing comes complete with the 3/4 Bilge pump hose kit to suit.

Description:

• 12-Volt Compact, fully submersible electric pump
• Extremely efficient, very low current draw and high capacity output
• Easy to clean snap lock strainers
• Water cooled long-life motor
• Ignition protection
• Water tight seals
• Stainless steel shaft
• Rustproof and corrosion resistant
• Silent and vibrationless operation
• Anti-airlock protection
• Comes with a easy to readuser manual, installation instructions & wiring diagram
• 1 Year warranty. Warranty only covers use in boats. Not ponds basements or fish tanks etc. A picture will need to be provided with the pump fitted in the boat for any warranty claims.

Specifications:

• Voltage: 12V DC
• Flow capacity:350 Gallons per hour -22 Litres per minute
• Max. delivery head: 3.8 metres (height of vertical water flow up pipe)
• Current draw: Only1.8 Amp
• Hose Outlet: Suits 20mm (3/4")dia hose
• Approvals: CE
• Twin core wire: 750mm long

Dimensions:

Height:105mm

Width: 60mm (Base)

Outlet: 20mm, 3/4" (Outside)

____________________________________________________

Easy to remove from base to clean the strainer

____________________________________________________

BOX

____________________________________________________

3/4 " Bilge Pump Plumbing / Installation Kit

Ever gone to fit a bilge pump? Then found out you need some hose and fittings.

Well this is a convenient kit with most of everything you need to install a bilge pump in your boat.

Comes with:

6ft of 3/4 " plastic bilge hose

Plastic through-hull fitting

Two stainless steel clamps

____________________________________________________

This automatic bilge pump float switch can be used on any 12 -32 volt (360-2500GPH) bilge pump. The float switch turns on when the water level exceeds 2 inches (51mm) then automatically turns off when the level drops below 3/4inch (19mm).

This switch doesn't use any mercury so its safe to use around people and friendly for the enviroment as well.

Description:

• Suitable for 12V-32V bilge pumps, with a maximum of 20 Amps
• Automatically turns your bilge pump on when the water level is over 2 inches (51mm)
• Automatically turns pump off when water level drops below 3/4 inches (19mm)
• Tough thermoplastic body
• Heavy-duty nylon housing
• Mercury Free (Very Safe)
• Submersible and Ignition protected
• Sillent Vibration Free Operation
• Comes with a easy to read user manual, installation instructions & wiring diagram
• CE certifications
• 1 Year warranty

Specifications:

• Voltage: 12 - 32V DC
• Current draw: 20 Amp max
• Approvals: CE
• Twin core wire: 750mm long

Dimensions:

Height: 60mm

Width: 140mm (Base)

____________________________________________________

Packaging Front and back

____________________________________________________

If your after a higher volume pump, bilge pump hoses, float switches or switches to help install this pump please check our other listings. As we keep a complete range of boating products to help you out.

Please note pictures may slightly vary from product and only there for reference. For all specifications please read the listing