54 LED Outdoor Solar Powered Security Motion Sensor Light Lamp Garden Path Decor

Features:

100% brand new and high quality.
Low power consumption and energy-saving.
It use solar charging system and light control, human sensor control technology.
It will light off during the day and light up automatically, when it senses someone coming at night, no need to manually control it.
Easy to install, The self contained weatherproof light needs no wiring and can be easily screw mounted anywhere the sun shines.
Widely used for illumination in garden, hallway, garage, squares and other places.

Smarter Sensor Modes:

Body sensor mode: Long press 3 seconds to turn on, light flashing, into the first mode, when in dark night, will light off without people coming near, however will light on if people comes.
human body sensor + micro-bright mode: when in dark night, the light will be dim without people coming near, however become bright if people comes.
Always bright mode: lights up in the dark automatically, lights off automatically after 5 hours.
Turn off the light mode: Boot state, long press 3 seconds, lights flash and then turn off.
Press the key to turn on the mode: press each key to change a mode, and then cycle.

; ; ; ; ; (Mode delay time: 15 seconds, if the sensor mode delay time is not finished again when the sensor, the timing will start again
; ; ; ; ; Duration: full charge can be more than 500 times (lights 15 seconds))

Specification:
Color: Black + White
Material: PC + ABS
Solar panel: Monocrystalline silicon 5.5V 1.5W
Solar conversion rate: 24%
Battery: 2 x 3.7V 2000MAH lithium battery(54 light)
Output power: 3.2V / 5w
Light Source: LED
LED quantity: 54pcs
Battery life: 2000 times
LED: 54 x 0.2 W LED
Light flux: 800lm (54 lights)
Charging time: 8 hours
PIR induction angle: 120 degrees
Sensing distance: 8-12 meters
Waterproof rating: IP65
Size: As picture shown

Package Included:
1 x LED Solar PIR Motion Sensor Light
2 x Screw

Notice:
If the test is done during the day, the product will have the built-in photosensitive sensor, and the side of the solar panel will need to be covered with the solar panel.
Then the performance will be tested. If the product is tested, the test panel will be tested. Encounter boot no response, there may be insufficient battery power, you can exposure in the sun 2-3 hours, and then boot test.