5m Complete Standard Sliding Gate Hardware Kit

Kit Includes

• Singular 78mm Recess Mount Wheels(QTY: 2)
• 1m Galvanized Sliding Gate Track(QTY: 10)
• 100mm Roller(QTY: 2)
• 165x110mm Galvanized Bracket(QTY: 1)
• 70mm Galvanized U Guide Gate Receiver Catcher(QTY: 1)
• 115mm High Bolt Down Anodized Gate Stop(QTY: 1)

Product Information

78mm Recess Wheels

• R10 profile to suit the entire range of APC Galvanized profile tracks
• Dual bearing system for the capacity of 250KG per wheel (500kg per pair)
• Fits into 75mm height tubing wit a cut out size to fit the wheel of 80x35mm
• Raises the gate by 40mm when installed with the floor track
• Easy installation with pre-punched fixings, just drops into place after cut out and screws to the tubing from the flanged sides

100mm Roller and Bracket Set

• 165mm Long Galvanized steel construction for long life outdoor use
• 100mm nylon rollers with completly adjustable positions
• 75mm internal clearance between rollers at full span, allowing for 25mm ajustment for the gate a gate thickness not exceeding 50mm is ideal (see 200mm long bracket to allow 85mm gate thickness)
• Pre-punched fixing holes ideal for adjustments prior to final fixing

Bolt Down Galvanized Floor Track

• R10 profile to suit the entire range of APC recess and flat mount wheels
• Rounded profile provides the least resistance for sliding gate movment over the alternative "V groove"
• High strength 3mm steel, Galvanized for complete long life outdoor use
• Pre-punched fixing holes ready for anchor nails (Supplied)
• Easy to install, bolts down to concrete! No need to set in during concreting

70mm U Guide

• Galvanized steel construction for long life outdoor use
• Flared entry to guide gate into the reciever in case of wind loads pushing the gate
• 70mm internal clearance ideal for standard steel or aluminum gates gates that are offset from the closing post or clad gates no greater than 65mm thickness
• Pre-punched fixing holes ideal for adjustments prior to final fixing

Anodized Gate Stop

• Anodized steel construction for long life outdoor use
• 115mm Height
• 40mm Rubber bumper
• Solid 100x80mm base
• Pre-punched 10mm fixing holes