Aquatic Clear Dam

Aquatic Clear Dam Flocculent

Aquatic Clear Dam is an advanced formulation that quickly clears existing turbidity, brown water and murky Lakes, Dams & Ponds.

Aquatic Clear Dam is a flocculent designed to remove suspended clay, silt, fine organic matter, microscopic organisms & algae from the water column improving clarity.

Aquatic Clear Dam usually generates noticeable results within 48 hours.

Organic matter, microscopic organisms & some forms of algae harbour waterborne diseases & pathogens & Aquatic Clear Dam can assist in removing these particles from suspension & improving water health.

Murky water can cause negative impact to irrigation systems & plumbing by:

• ; ; ;Blocking irrigation spray nozzles

• ; ; ;Build-up of sludge in drippers & pipes

• ; ; ;Staining of plumbing equipment

• ; ; ;An unsafe swimming environment

Factors such as wind or rain events may affect the results of this product.

Rain events can cause new turbidity to enter the dam. It is best to implement control methods to prevent run off from rain events introducing new turbidity by placing crushed rock or hay bales to slow and filter new input water.

Wind can cause water to lap against dam edges, this action on loose or not-compacted dam edges can mobilise sediments. It is best to therefore compact these edges by placing sand, crushed rock, rock or geo-fabric to firm up these edges for best long term sustainable results.

For ponds and dams with extremely high sediment loading i.e. chocolate brown in colour or ponds and dams that have never had clear water before, it is essential that the source of mobilisation is dealt with prior to using this product.

Sources of mobilisation ;

• ; ; ;soft edges

• ; ; ;run-off

• ; ; ;bare ground

To reduce the impact of mobilisation, dam edges can be hardened with geofabric, crushed rock, sand or shallow-rooted plants.

Improve clarity of murky water with Aquatic Dam Clear

DIRECTIONS

Aquatic Clear Dam is disturbed as evenly as possible over murky water. ;

Aquatic Clear Dam can be diluted with clean water up to 20:1 to assist in even application.

FOR OPTIMUM RESULTS;

• ; ; ;Treat on days of minimal wind

• ; ; ;Do not treat water where pH is above 9

To achieve your desired results additional applications can be made 72 hours after initial application.

APPLICATION RATES

Aquatic Clear Dam is disturbed as evenly as possible over murky water at an initial rate of 20 litres per 1 Mega Litre (ML) of water.

To achieve desired results, subsequent treatments at half initial application rate - 10L per 1 Mega Litre of water.

This item is dispatched out of Melbourne, Victoria.

We are a listed Australia Business with an Australian ABN.

We are a proud 100% owned Australian Business.