Baby Proofing, Tables Corner Guards Baby Child Safety, 20ft(6m) Soft Bumper Strip Furniture Clear Toddler-Pre-Tape Adhesive （9.84ft）

Product Description
Pls, refer to our concise installation video on our listing before you install our item. It can help you
avoid stretch and wrinkle when ripping off the layer of the double-sided tape or avoid getting loose
when installing our bumper strip.
In case you found your bumper strip getting loose after several days you installed it for some unexpected causes
don't worry, just compress it again, it will keep firmly stick to the table and protect your baby continuously, our double-sided tape's lifetime will last over three years.
Q1: Will removing it damage the tabletop?
A1: Normally, it will not damage your furniture. However if your furniture is covered with paper laminate or those that are prone to paint loss, I would not recommend you to install it on this furniture as the adhesive is very sticky and you may damage the furniture.
Q2: How can I remove them without damaging the table or the walls?
A2: If you want to remove it, do not tear it off directly. Please use a hairdryer or heat gun to soften the tape first (not too hot) and then tear it off slowly to prevent tearing the tabletop or wall. If for some reason, there is still glue residue, we recommend rubbing a few drops of olive or vegetable oil or hot water on it and then wiping with a cloth. This may have to be repeated once or twice. We do not recommend using other solvents.
Q3: What are the unsuitable materials for bumper tapes?
A3: Table corner edge protection is suitable for clean and smooth flat surfaces. It is not suitable for plaster surfaces, paper surfaces, diatomaceous earth, untreated wood, sink tops, and other uneven surfaces. If you are of one of the above materials, I would not recommend that you install it on these pieces of furniture as the adhesive is very sticky and you could damage the furniture.