Belkin A3L980BT10MBLUS 10M CAT6 NETWORKING CABLE High Performance Category 6 UTP Patch [A3L980BT10MBLUS]
Belkin A3L980BT10MBLUS 10M CAT6 NETWORKING CABLE High Performance Category 6 UTP Patch
- CAT6 Ethernet patch cable for connecting to LANs or the Internet
- Ideal for use with 100-1000BASE-T networks
- RJ45 plugs with 50-micron gold-plated connectors for clear signal
- 4 twisted pairs of stranded copper wires prevent crosstalk
- Snagless design prevents cracking and breaking
CONNECT EASILY TO A COMPUTER NETWORK
Upgrade your network and enjoy clean and clear transmissions with the Belkin CAT6 Ethernet Patch Cable. This patch cable lets you connect a laptop or desktop computer to a wall outlet, modem, router or another networking device. It meets the CAT6 standard and is suitable for use with 100/1000BASE-T networks. Patch cables are also handy in home offices and hotel rooms to establish a wired Internet connection.
RJ45 PLUGS WITH GOLD-PLATED CONTACTS FOR A CLEAR SIGNAL
The Belkin CAT6 Ethernet Patch Cable features an RJ45 male connector on each end. Internal load bars ensure accurate plug positioning and consistent high performance, while 50-micron gold-plated connectors resist corrosion and wear and deliver a clean, clear signal.
GIGABIT SPEEDS WITH CAT6 TECHNOLOGY
Made with Unshielded Twisted Pair (UTP) stranded copper wires, this cable meets the CAT6 Ethernet network cable standard and can support Ethernet speeds of up to 1 gigabit per second. Unlike CAT5 technology, CAT6 cables fully use all four pairs of twisted copper wires for greater bandwidth and speed.
LESS CROSSTALK WITH TWISTED PAIR WIRES
The CAT6 Ethernet Patch Cable features 4 UTP 24 AWG (American Wire Gauge) stranded copper wires to reduce electromagnetic interference. Stranded cables are more pliable than solid cables, making them better suited for travel. Plus, the wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.
Characteristic Impedence
100±15O @ 1 ~ 550MHz
Conductor Construction
Bare Stranded Copper
Conductor Resistance
93.8O/km/20°C max
Conductor Size
24AWG x 4pairs
Dielectric Strength
AC 1.5kV
Flame Retardant
Test CM
Insulation Material
HDPE
Jacket Material
PVC
Mutual Capacitance
56pF/m max
Propagation Delay
536nS/100m max @ 550MHz
Spark Test
2.5kV
Standards Compliance
ISO/IEC 11801; TIA/EIA-568-B.2-1
Structural Return Loss
8.6dB min at 550MHz
Cable Type
Cat 6
Cable Characteristic
Unshielded twisted pair (UTP)
Connector on First End
1 x RJ-45 - male
Connector on Second End
1 x RJ-45 - male
Jacket Diameter
5.9±0.15mm
Connector Type(s)
50 micron gold-plated connector