Caremax SC500XL Tow Bar Mobility Scooter Power Wheelchair Carrier

Caremax
Caremax SC500XL Tow Bar Mobility Scooter Power Wheelchair Carrier
Caremax SC500XL Tow Bar Mobility Scooter Power Wheelchair Carrier
Caremax SC500XL Tow Bar Mobility Scooter Power Wheelchair Carrier
Caremax SC500XL Tow Bar Mobility Scooter Power Wheelchair Carrier
Caremax SC500XL Tow Bar Mobility Scooter Power Wheelchair Carrier
Caremax SC500XL Tow Bar Mobility Scooter Power Wheelchair Carrier
Caremax SC500XL Tow Bar Mobility Scooter Power Wheelchair Carrier

The SC500 mobility scooter carrier is an incredibly high quality and robust product.

It features built-in LED lights with 7-pin flat plug to connect to your vehicle. It also features a number plate light and has holes and screws pre-drilled for your licence plate.

The welded handle on the ramp allows for easy folding and unfolding.

Tie down straps can then be hooked onto any of the 10 tie down holes on the tall ramp sides.

The ramp sides also feature carry handles for easy handling when installing the carrier.

Supporting the carrier is the heavy duty 2" hitch tube which features 4 bolts and a safety pin underneath to allow the hitch tube to be removed from the carrier.

The hitch tube has a 5/8" hitch pin hole for securing the carrier to your vehicle and will work on class III or IV hitches.

The SC500XL features an integrated 2 section ramp which folds up and out into 3 different positions:

  • No-load
    Keep the ramp folded flat to the carrier surface and held down with a spring pull pin. The folded flat position is to keep the ramp stored and secured when the carrier is folded up.
  • Loading
    Unfold the ramp and the position allows for scooters or power wheelchairs to be pushed or driven up the carrier.
  • Loaded
    The ramp position allows the ramp to stand up straight when a mobility device is on the carrier. The ramp is held vertically in place with a spring pull pin.

PLEASE NOTE:

1. Make sure the hitch is a 50mmx50mm (2") square hitch and the distance from the hole of the hitch to the rear edge less than 15.5CM. The hitch pin hole to the tray of the carrier is 15.5cm when folded up and may cause fitment issue if the vehicle also has a spare tyre mounted on the tailgate.
2. Never stand on the carrier or ride scooter on the carrier.
3. Please check with your local towbar specialist to ensure that your tow bar is able to carry the weight of your scooter and the carrier.
4. Please consult your local Road Transport Authority and always comply with the local rules and regulations that may apply when using the carrier.
5. Make sure the carrier is big enough for your scooter, the length should be from the front wheel to the anti-tilt wheel or rear basket. 
6. In some cases you may need to drill additional holes to mount the LED lights and/or licence plate.


THE SPECIFICS

  • Weight Capacity: 226kg
  • Carrier Length: 150cm
  • Carrier Width: 80cm
  • Tray height: 10cm
  • Ramp Length: 150cm
  • Ramp Width: 78cm
  • Ramp on: left side
  • Centre of pin hole to carrier(fold): 15.5cm
  • Centre of pin hole to carrier(unfold): 38cm
  • Carrier Weight: 44kg
  • Colour: Black
  • Hitch suitable: 50mmX50mm(2"X2")Hitch
  • Warranty: 12 months


COMPONENTS：

  • 1x Carrier with ramp
  • 1x Hitch tube(no hitch bolt)
  • 2x LED light,left one with number plate light
  • 1x 7-pin flat Plug
  • 1x Moving wheel
  • 1x Licence plate screws suit
  • 1x User Manual