DECATHLON FORCLAZ Inflatable Trekking Mattress Air Insulating XL 1 Person 195x60cm - MT500

Our designers, who are trekking enthusiasts, created this insulated inflatable mattress for sleeping comfortably while trekking or bivouacking. XL version. Thanks to its R-Value of 3.3, this mattress is perfectly suited for 3-season use. Its weight is still low (800g). And the pouch turns into a pump bag!

Our designers, who are trekking enthusiasts, created this insulated inflatable mattress for sleeping comfortably while trekking or bivouacking. XL version.

Volume and folded sizeFolded dimensions O 14 cm x 30 cm. Volume: 4,6 litres.

How to inflate your mattressTo prevent moisture from being blown into the mattress, we recommend that you use the pump bag in the pouch.To do this, unroll the entire pump bag/pouch. Connect the valve of the pump bag to the "IN" valve of your mattress. Blow to about 10-20cm from the inlet of the pump bag, to inflate the main volume as much as possible. Roll the bag on itself to the valve to push the air out of the main bag into your mattress.

What is the R-Value? The R-Value is a measure of the thermal insulation. It measures the ability of a mattress to retain or prevent heat from escaping from a warm body (human body) to a cold floor.The higher the R-Value, the better the insulation of the mattress.Please note that the R-Values can be added; this means that you can use two mattresses and add their R-Values.All our mattresses are tested to standard ASTM F3340-18.

What R-Value for what use?R-value from 0 to 1.9: Hot season (summer) onlyR-value from 2 to 3: 2 or 3-season (spring-summer-autumn)R-value from 3 to 4: 4-seasonR-value of 4.5 and higher: Use in all 4 seasons and in extreme conditions (glacier, far north and high altitudes)

Tips for sleeping well on your mattressOnce you are lying down, remember to adjust the inflation pressure of the mattress by slightly pressing the IN valve (open cap). A mattress that is too hard is often synonymous with discomfort.Silicone patches on the top of the mattress are designed to reduce the sliding of your sleeping bag on the mattress.

ADDITIONAL SUSTAINABLE DEVELOPMENT INFORMATIONTextile dyeing requires a lot of water but also produces waste water from the dye baths. To reduce this impact on the environment, we use only mass pigmentation on one yarn out of every two for the grey fabric on the back of the mattress, thus reducing our consumption and our impact on water.In addition, 70% of the wadding used as insulation is recycled polyester.These actions allow us to reduce CO2 emissions by 12%.

How to repair a leaky mattressAn inflatable mattress is not puncture-proof but it can be repaired! When using it, take every care when installing and handling it. In the event of a problem, we recommend using self-adhesive repair patches (ref: 8584596).

Thanks to its R-Value of 3.3 this mattress is perfectly suited for 3-season use. Its weight is still low (800g). And the pouch turns into a pump bag!

Easy transport Weight: 800 g. Volume: 4,6 litres. Carrying pouch that turns into a pump bag

Sleeping comfort Size 195x60x5 cm. Rectangular shape. Comfortable, thick mattress

Thermal insulation Usable in 3 seasons. R-Value 3.3 according to standard ASTM F3340-18

Easy assembly / dismantling Inflate with the built-in pump bag. Bi-valve: IN with anti-blowback; OUT to deflate

Traction Anti-slip silicon pads. Limits the sleeping bag from sliding

Our designers who are trekking enthusiasts created this insulated inflatable mattress for sleeping comfortably while trekking or bivouacking. XL version.

Easy transport
Weight: 800 g. Volume: 4,6 litres. Carrying pouch that turns into a pump bag

Sleeping comfort
Size 195x60x5 cm. Rectangular shape. Comfortable, thick mattress

Thermal insulation
Usable in 3 seasons. R-Value 3.3 according to standard ASTM F3340-18

Easy assembly / dismantling
Inflate with the built-in pump bag. Bi-valve: IN with anti-blowback; OUT to deflate

Traction
Anti-slip silicon pads. Limits the sleeping bag from sliding