DOSS VPBPP Push Pin Video and Power Balun Passive Up To 250M Eliminates Costly and Bulky Coaxial Cable PUSH PIN VIDEO & POWER BALUN

DOSS
DOSS VPBPP Push Pin Video and Power Balun Passive Up To 250M Eliminates Costly and Bulky Coaxial Cable PUSH PIN VIDEO & POWER BALUN
DOSS VPBPP Push Pin Video and Power Balun Passive Up To 250M Eliminates Costly and Bulky Coaxial Cable PUSH PIN VIDEO & POWER BALUN

Features

The DOSS Range of UTP Video+Power Baluns allow you to connect your CCTV system using cheaper, thinner, lighter andmore readily available CAT5E cable rather than expensive andbulky RG59U cable.

The passive (non-amplified) baluns allow transmission of realtime CCTV video signals and power over cost-effective Unsheilded Twisted Pair (UTP) cable, without any compression, loss or signal degradation and without the needfor extra power supplied to be installed. Sending camera power over the same twisted pair as video means less cabling, and no power supply required to be installed near to the camera. Baseband (composite) signals of any type are supported.

Applications - Security Monitoring System

  • Multimedia Network Teaching System
  • Medical Monitoring Display System
  • Industrial Automation Control System
  • Banking, securities, financial information display system
  • Remote Network Server Monitoring
  • Department Store Security
  • Casino Security
  • Hospitals, Airports and banks
  • School Campuses

VPBPP PASSIVE VIDEO & POWER BALUN (8-WAY PUSH PIN)

The VPBPP has a mini-coax pigtail lead which allows quickmounting onto fixed cameras and allows in-camera mounting in most dome cameras. The 8-Way Push Pin terminals for UTP cable enable quick and simple installation. Working in pairs, the VPBPP eliminates costly and bulky coaxial cable, allowing live CCTV color video signal up to 400m (1300ft).

The superior interference rejection and low emissions ofthe VPBPP allow signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable infrastructure. The VPBPP has built-in surge suppression to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.

Example scenarios Basic application: Direct connection with monitor

Simple application: Four cameras connected to DVR

Full CCTV application: Many cameras to DVR via powered hub.

Features - Single Channel Passive Video & Power Transceiver

  • 12V or 24V; DC or AC (does not convert voltage or DC↔AC)
  • Transmit power signal up to 250m (750ft)
  • Full-motion colour signal up to 400m (1300ft) and monochrome (B&W) up to 600m (1950ft) via UTP CAT5e/6
  • NTSC, PAL & SECAM video format compatible
  • Real-time transmission
  • Male BNC with extended mini-coax pigtail
  • 8-Way Push Pin terminals
  • No power required
  • Exceptional interference rejection
  • Built-in TVS (Transient Voltage Suppressors) for surgeprotection
  • Lightning protection design Grade III
  • 50dB crosstalk and noise immunity
  • Wave Filter Design, Anti-Static Design
  • Compact size and easy installation
  • ABS engineering plastic housing

Specifications Specifications Applied Devices CCTV cameras, monitors, DVR, switchers,IP encoders, and other CCTV equipment Video Video Format PAL, NTSC, SECAM Operating Frequency DC to 5MHz Max Distance UTP Category 5e (24AWG)
Color: 400m (1300ft) B&W: 600m (1950ft) Common-mode / Differential-mode rejection 15kHz to 5MHz 60dB typical Impedance Coax, Male BNC 75 unbalanced UTP, two coax pigtail 100 balanced Attenuation 1.5dB Max typical Wire Type Network Wiring One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm) Category Type 2 or better Impedance 100 ±20 ohms DC Loop Resistance 18 per 100m (52 per 1,000ft) Differential Capacitance 62 pF/m max (19 pF/ft max) Power No external power required to operate Power input/output 12 or 24V / 1.5A max; DC or AC Note: Does not convert voltage or DC/AC Connector Video input/output Male BNC connector Video input/output 8-Way Push Pin terminals Protection Surge Protection Renewable solid state surge protection Built-in Transient Voltage Suppressor(TVS) Antistatic Yes Mechanical Housing ABS engineering plastic Body Color Black Dimensions (L*W*H) 65*36*25mm (BNC connector & cable excluded) Net Weight 60g Environmental Operating Temperature -20’Š~ 70’Š C Relative Humidity 0~95% (non-condensing) Storage Temperature -40’Š~ 150’Š C Reference Balun LEDs _ _ Power indicator—power is being transmitted/received Over-current—maximum current (1.5A) has been exceeded _

Video and Power Balun wiring _ Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 T568A White/ Green Green White/ Orange Blue White/ Blue Orange White/ Brown Brown T568B White/ Orange Orange White/ Green Blue White/ Blue Green White/ Brown Brown DOSS_Video+ Power_Balun Video Video Power_- Power_- Power_- Power_+ Power_+ Power_+ _

Power over Twisted Pair: Voltage Drop Reference Transmission Distance Transmission Voltage (Voltage Drop) 12VDC/0.5A camera_requirement 12VDC/1A camera_requirement 12VDC/1.5A camera_requirement 50m / 160ft 13.5V (1.5V) 15.5V (3.5V) 17.0V (5.0V) 100m / 320ft 15.5V (3.5V) 18.5V (6.5V) 22.0V (10.0V)

150m / 500ft 17.0V (5.0V) 22.0V (10.0V) 27.0V (15.0V) 200m / 650ft 18.5V (6.5V) 25.5V (13.5V) 32.0V (20.0V) 300m / 1000ft 22.0V (10.0V) 32.0V (20.0V) 42.0V (30.0V) eg: to supply a camera that requires 12VDC/0.5A, over a run of 150m cable, you require an initial transmission voltage supply of 17.0VDC (to account for 5V voltage drop over cable) Note: based on typical CAT5e cable (will vary on make and quality of cable) {/tabs
Weight: 0.106