ELM327 OBDII WiFi Car Diagnostic Wireless Scanner

ELM327 OBDII WIFI CAR DIAGNOSTIC WIRELESS SCANNER

The ELM327 WIFI OBDII interface is an engine performance and diagnostics tool for automotive professionals and enthusiasts that allows you to wirelessly connect your car's on-board computer from your any Wi-Fi enabled device with the compatible application or software. The WiFi connectivity makes it compatible with BOTH Apple iOS (iPhone(R), iPad(R), iPod(R) Touch) and also Android devices!

FEATURES

Read and erase diagnostic trouble codes (DTCs) and turn off the check engine light

Compatible with BOTH Apple(R) iOS and Android devices

Pays for itself with one use

Hassle-free setup: Setup in seconds

View real-time vehicle data, graphs and performance parameters while you're driving

Find and fix problems before they happen

Support for low power sleep mode and high-speed communication

Compatible with all OBDII compliant vehicles

Wi-Fi connection provides a wider operating range than Bluetooth(R)

Compatible with SAE J1850 PWM and SAE J1850 VPW protocols found on many Ford and GM vehicles (these protocols are NOT supported on cheaper scanners)

Display and record real-time sensor data, including:

Vehicle Speed

RPM

Fuel Consumption

Engine Coolant Temp

Fuel Pressure

Calculated Engine Load

Throttle Position

Intake Manifold Pressure

Air Intake Temp

Timing Advance

Mass Air Flow Rate

Fuel Level

Barometric Pressure

EVAP System Vapor Pressure

Fuel Trim

Engine RPM

Fuel System Status

Vehicle Speed

Short Term Fuel Trim

Long Term Fuel Trim

Timing Advance

Absolute Throttle Position

Oxygen sensor voltages/associated short term fuel trims

Material: Polycarbonate

Note: Your vehicle may not support all engine metrics. The availability of engine metrics varies depending on the vehicle make and model

SPECIFICATIONS

SSID: WiFiOBD

IP: 192.168.0.10

Subnet: 255.255.255.0

Port: 35000

Range: 50 FT (Line of sight)

Antenna Type: Internal

Operating voltage: 12V, internal protection from shorcircuits/overvoltages

Nominal idle current: 45mA

Power Consumption: 0.75 Watts

Wi-Fi Standard: 802.11a/b/g

Operating Temperature: -15 to 100

Dimensions: 2.75 x 1.25 x 1.2 inches

Item Weight: 59.3g

Compatible Protocols

ISO 9141-2 (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (fast init, 10.4 kbaud)

ISO 15765-4 CAN (11 bit ID, 500 kbaud)

ISO 15765-4 CAN (29 bit ID, 500 kbaud)

ISO 15765-4 CAN (11 bit ID, 250 kbaud)

ISO 15765-4 CAN (29 bit ID, 250 kbaud)

SAE J1850 PWM (Found on many Ford vehicles) (41.6 kbaud)

SAE J1850 VPW (Found on many GM vehicles) (10.4 kbaud)

SAE J1939

Apple iOS and Android Easy Setup:

Go to WiFi settings, search for the WiFi connection from the scanner and connect to it
Open your favorite application and connect. If necessary, set the IP to 192.168.0.10 and Port 35000 in settings

Hardware requirements:

PC/iPhone/iPod/iPod Touch/iPad/Android
Important:Your PC requires wireless LAN router supporting WiFi 802.11 a/b/g for linking.

Software Requirements:

All ELM327 based software Android : Torque
iOS base software in Apple store: Rev / FUZZYCar / DashCmd / SpeedPORT / Nova Scan/OBDcardoctor
Attention: iOS base software are not included you must buy from Apple App Store! We only offer PC version software & Instructions manual (on the CD)

VEHICLE COVERAGE

Works with all models that support the OBD2 standard - European, Japanese, USA

For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
All vehicles from 1996 in USA and Petrol cars from 2001,diesel cars from 2003/2004 in Europe are obd2 compliant.

PACKAGE CONTENTS

1x ELM327 OBDII WiFi Car Diagnostic Wireless Scanner