EZY FIT Heated Towel Rail - Flat Tube (W900mm x H920mm) - Matte Black
]
This large bold Aguzzo® Matte Black Stainless Steel Heated Towel Rail comfortably fits two standard towels side by side. It also has plenty of room for additional towels on its 8 horizontal bars. Its large flat bars provide high heat contact to the towels so they are warm and dry in minimal time. Unlike lightweight and lower grade steel heated rails Aguzzo® rails are thick 304 stainless steel.
Optional concealed-wire - choose to plug in or hard-wire
Efficient - Only 135 watts power consumption!
Matte Black finish - the latest in bathroom styling
Waterproof - IP55 rated to withstand water sprays
This black Aguzzo® Stainless Steel Heated Towel Rail has bold flat rails. Its generous 900mm width easily fits two standard towels side by side with additional space for other towels. It boasts 8 x large flat horizontal bars to provide high heat contact to the towels so they are warm and dry in minimal time. Unlike lightweight and lower grade steel heated rails Aguzzo® rails are thick 304 stainless steel.
- Contemporary - the Aguzzo® flat bar heated towel range is a bold geometrical design with clean straight lines that complement any square style bathware ranges such as the Aguzzo Montangna range
- Generous - The large 900mm x 920mm size can fit a lot of towels
- Flexible install - You have the option to attach to the wall and simply DIY plug in, or conceal the wiring through the wall bracket into the wall (electrician required to connect). See install instructions below - you can simply plug in or have your electrician provide a connection in the wall for concealed wiring. Simply connect to and control via a wall switch or programmable timer (sold separately) so you can enjoy warm fluffy towels when you need them!
- Efficient- Only 135 watts power consumption! It only takes 5 to 10 minutes to heat up.
- High surface area - the large flat bars minimise the time to heat the towels
- Safe - full electrical safety compliance and licencing with with AS/NZ: 60335 and c-tick requirements. The latest in heating technology provides an even surface heat - the bars are dry and not filled with liquids or oils, so you can even dry delicate garments. The surface can heat to 55ºC, being hot but not scalding - see attached instructions for more safety information.
- Matte black finish - The latest in bathroom design - powder coated and fully resistant to heat and moisture. 304 stainless steel is a superior choice
- Waterproof - IPX5 rated to withstand water sprays - a great choice for the bathroom
Key specifications
- Dimensions: 900mm width; 920mm height; 110mm depth (from wall)
- Rails: Vertical tubes are 30mm x 30mm, Horizontal rails are 20mm depth x 40mm high
- Power: 240V - 135 watts. Includes 1.5m black power cord and plug
- Installation: Can be plugged-in or concealed wired - see installation instructions below
- Control: Must be controlled by wall switch or programmable timer (sold separately)
- Wiring: Select Left or Right wire exit - see installation instructions below.
- Surface temperature: up to 55º C
- Water-proof rating: IP55 (independently tested to withstand water sprays and splashes)
- Compliance: Electrical safety standards AS/NZ 60335 and C-tick