Fibaro Flood Sensor
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor
The device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to an alarm system controller, through opening an NC contact.
The device has a built-in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built-in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending an alarm signal in case of substantial inundation of water.
Product Details
- Compatible with any Z-Wave network controller,
- May be connected to any alarm system (potential free output terminal),
- Extremely easy installation - simply put on a surface prone to flooding,
- May be installed anywhere - flood sensor's contacts extended with a wire,
- Battery or VDC powered. When connected to an external, VDC power source, the
- battery serves as an emergency power source,
- Theft protection - tilt is reported to the Z-Wave network or alarm system's main controller,
- Two operating modes - flood / temperature sensor or just a temperature sensor.