Fibaro Flood Sensor is a universal Z-Wave flood and temperature device

Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor

The device can be battery (ca. 2 years battery life) or VDC powered (12 or 24
VDC). Flood alarm is sent to the Z-Wave network devices or additionally to an alarm system controller, through opening an NC contact.
The device has a built-in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built-in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending an alarm signal in case of substantial inundation of water.

Product Details * Compatible with any Z-Wave network controller, * May be connected to any alarm system (potential free output terminal), * Extremely easy installation - simply put on a surface prone to flooding, * May be installed anywhere - flood sensor's contacts extended with a wire, * Battery or VDC powered. When connected to an external, VDC power source, the battery serves as an emergency power source, * Theft protection - tilt is reported to the Z-Wave network or alarm system's main controller, * Two operating modes - flood / temperature sensor or just a temperature sensor. Product Support Manuals:

OPERATING MANUAL FLOOD SENSOR FGFS-101 v2.1 - v2.3

Videos / YouTube:Flood Sensor

Technical Specifications Product Name Flood Sensor Battery Type CR123A Operation Range 30m Power 12 - 24 VDC (optional) Radio frequency 921.42 MHz (AU/NZ Z-Wave) Power Consumption 0,4W Operation temperature 0 - 40C* Measured temperature range -20 to 100C Temperature measuring accuracy 0,5 C Housing ABS Size (Diameter x Height) 72 x 28 mm