GNX USB Controller (HID-Main)

The GNX USB Controller provides USB connectivity for GNX modules to the PC (by default, GNX modules interconnect via BUS cable to each other and Gladiator NXT, but not directly to the PC).

Important:
MS Windows DirectInput allows for only 8 axis per controller.
You need 1x GNX-HID USB controller if there are more than 8 axis in your configuration (and another one if there are more than 28=16 axis).
Example: For 8 axis, you do not need a GNX-HID USB controller; however, for 9 to 16 axis you need 1 x GNX-HID USB controller, and for 17 to 24 axis 2 x GNX-HID USB controllers are required, and so on.

How to calculate the number of axis:

Gladiator NXT base: 3 axis
Gladiator Premium SCG grip: 3 axis
Gladiator Standard SCG grip: 1 axis
GNX-THQ or GNX-THQ-V: 3 axis
GNX-SEM or GNX-SEM-V: 2 axis
FSM-GA: 0 axis

Add all axis across your total configuration.
Then use above formula to determine how many GNX USB Controllers you need.

Examples:

Gladiator Premium with THQ, SEM and FSM-GA has 11 axis
-> You need to order 1 x GNX USB Controller
Gladiator Premium with THQ (or THQ-V) has 9 axis:
-> You need to order 1 x GNX USB Controller
Gladiator Premium with SEM (or SEM-V) has 8 axis:
-> You do not need to order an extra GNX USB Controller
Gladiator Premium with FSM-GA has 6 axis:
-> You do not need to order an extra GNX USB Controller
Gladiator Standard with THQ and SEM has 9 axis:
-> You need to order 1 x GNX USB Controller

Specifications

NJoy32 platform
32-bit ARM Controllers inside base and grip
Plug & Play with Driver-Free Installation (Recommended for Most Users)
Firmware Upgrade via USB
Onboard Memory for Storing Profiles
Optional Programming Software Available (For Advanced Users)
USB 2.0 HID controller
Type-C connection

Connectivity

USB 2.0

Compatible with - GNX THQ/V

GNX FSM-GA
GNX SEM/V

Contents - PCB board

Set of screws
USB Type-C cable (180 cm / 6?)
Transparent rubber lens