Handheld Sewing Machine, Mini Sewing Machine, Portable Sewing Machine With Sewing Needle for Beginners, Convenience Machine for Travel &Household

SSSuperA
Handheld Sewing Machine, Mini Sewing Machine, Portable Sewing Machine With Sewing Needle for Beginners, Convenience Machine for Travel &Household

How To Use Handheld Sewing Machine

  1. Install 4 AA batteries (it is recommended to use high quality batteries to drive the machine)
  2. Standby: Hold the base with four fingers of your right hand, put your thumb naturally on the top of the upper cover of the fuselage, and hold the whole machine steadily.
  3. Put the cloth: use your right index finger to lift the pressure plate, put the fabric ready to be sewed flat under the pressure plate, gently put the pressure plate back to press the fabric
  4. ;Sewing operation: Use the left hand to hold the fabric, the right thumb gently presses down quickly, the cloth feeding mechanism will automatically send the sewing object to the left. Hold the right hand of the machine, let the machine enter the cloth by itself, the left hand controls the direction of the cloth Sew straight lines until the end of sewing, the machine can automatically feed the cloth and adjust the tightness between the stitches
  5. Knotting: the knitting is done after the single-thread machine is sewn.
  6. Change the thread group: pull out directly, be careful not to drop the spring. If you change the large thread group, you can connect the spare extension rod to the spool shaft and put it into the large thread group. Then rethread the thread and adjust the tightness of the thread Sew.
  7. Change the needle: Loosen the fixing screw, remove the broken needle, and install a new needle.

Note

  • The switch of the sewing machine will have a fuse, please remove it before you use
  • When the sewing machine fails to start because of the temporary rotation of the cloth, please turn the button on the side of the machine to rotate it arbitrarily, and click the switch until it can run.

Situation you might encounte

  1. Situation: Disconnection and jumper handling methods
  2. Cause: The threading is incorrect
  3. Solution: There is a screw in front of the needle, loosen it, put the needle in the innermost, if it does not work, put the needle down a little bit and try again (there is a recessed place in front of the needle, this place must be facing forward Can be adjusted)

Package Include

  • Handheld Sewing Machine *1
  • Bobbin Sewing Thread *10
  • Needles *2
  • Scissor *1
  • Threader *1
  • Tap Measure *1
  • Extended Spindle *1