Health Of Mind Art - Cast Away Ultra Clear Art - Resin - 1.5L Kit

Health of Mind Art Cast Away Resin is an art resin designed for thin casting and pour over art.

Itis a 2-part epoxy resin system. It is designed as an easy to use 2:1 mix ratio by volume. Cast Away is suitable for artwork and thin casting applications. Cast Awayhas a medium cure speed allowing for quick physical property development and demoulding andexhibits a low viscosity giving excellent air release leading to minimal bubble formation.

Application

Cover working area with cardboard or plastic. Cast Awaycan be poured into moulds made from plastic, silicone, or timber coated with a suitable tape or mould release agent. For best results, apply at temperatures between 15 and 25&ordmC and at below 85% humidity. Air bubbles introduced during mixing will typically dissipate during cure. If required, a heat gun or butane torch can assist in the removal of bubbles. Care should be taken to avoid over heating in one spot & sweep the heat gun continuously across the surface for a few seconds. The mixed product should be cured in a dust free area, and should be covered during cure.

Limitations

Avoid working in conditions that could cause condensation to form on the uncured coating, and give rise to amine surface bloom or blush. Do not thin this product. Do not change the mixing ratio. If casting exceeds 20mm there is the potential for excess heat to develop, giving rise to shrinkage and/ordiscolouration.

This product is designed for thin casting applications. For applications exceeding 20mm deep, it is recommended that Health of Mind River Cast Resinbe used instead.