L Com Compact Weatherproof Cat6 Ethernet Lightning Protector
L-COM COMPACT WEATHERPROOF CAT6 ETHERNET LIGHTNING PROTECTOR
The L-com ALS-CAT6HPW Ethernet Lightning Protector provides superior lightning and surge protection for indoor 10/100/1000 Base-T Ethernet networks. The unit has low line to line and line to ground capacitance to minimize distortion of high-speed signals. The design provides protection for both common and differential mode surges.
This protector has been designed to meet the GR-1089 Intra-Building surge protection requirements for 10/100/1000 Base-T Ethernet lines. In addition, the unit is compatible with 802.3af/at Power-over-Ethernet (PoE) devices. This device supports PoE mode A and B for power. The ALS-CAT6HPW shielded RJ45 jacks are isolated from the safety ground. This minimizes the chance of a ground loop being introduced.
This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. PG16 cable glands are provided on the enclosure as well as an external ground clamp to provide a tie point for earth ground. The PG16 cable glands are large enough to pass an un-booted RJ45 connector through so pre-terminated cables can be used.
FEATURES
For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately)
CAT6, CAT5e and CAT5 compatibility
GR-1089 Intra-Building rated
Cable shield isolated from safety ground
IEEE 802.11af/at Power-Over-Ethernet (PoE) compatible
Weatherproof ABS enclosure with gasketed cover and shielded RJ45 jacks
SPECIFICATIONS
Manufacturer's Product Code: ALS-CAT6HPW
Connector Type 1: RJ45 Shielded (Female)
Connector Type 2: RJ45 Shielded (Female)
PoE Clamping Voltage: Wire - Wire: 15 Volts, Wire - Ground: 90 Volts, Shield - Ground: 90 Volts
PoE Mode Support: 802.3af/at Mode A and B for power
Dimensions: 119.8 x 80.0 x 55.3mm
PACKAGE CONTENTS
1 x L Com Compact Weatherproof Cat6 Ethernet Lightning Protector