Oricom DTX4200X UHF CB Radio w ANU913 Antenna Pack

Oricom DTX4200X UHF CB Radio with ANU913 Antenna Outback Value Pack (Oricom DTX4200X4PK)

We Think You Should Know

• 80 Channel UHF CB Radio
• Kit Includes:
  • UHF CB Radio DTX4200X
  • 3dBi Antenna ANU913
• Dual Receive
• 96 Multi-colour LCD Backlit Display
• Dust & Splash Resistant
• 38 CTCSS & 104 DCS codes
• Professional Grade Speaker Mic

Overview The Outback Value Pack pairs the new and improved DTX4200X Dual Receive UHF CB Radio with the ANU913 3dBi UHF Antenna with Detachable Fibreglass pole.

The Oricom DTX4200X IP54 is a dual Receive 5 Watt UHF CB Radio. Featuring a potent 5-Watt operation, 80 channels with 38 CTCSS and DCS Codes, 3 memory groups, and fast scanning, guaranteeing a seamless and reliable connection at all times.

Built off the success of the DTX range of Dual Receive UHF CB radios, the NEW DTX4200X is the ultimate in Australian UHF CB Radio technology. Dual receive function allows you to receive and listen to two different channels simultaneously without the need to have two UHF CB Radios installed.

The Oricom ANU913 3dBi antenna features a heavy-duty barrel spring with a detachable fibreglass pole. The antenna measures 64cm including spring and the coax cable length is 4.5m.

General Compliance AS/NZS 4365:2011 Frequency Range TX/RX 476.425 - 477.4125 MHz Number of TX/RX Channels 80 UHF CB Channels (75 voice) Channel Spacing TX/RX 12.5KHz Operating Modes Simplex, Repeater TX offset (+750KHz) Scanning Speed 50 msec per channel Antenna Impedance 50 Ohms Operating Volts (Nominal) 13.8VDC Operating Volts Range 10 to 15VDC Over Voltage Protection Diode and Voltage Regulator System Over Current Protection 2 AMP Fuse Reverse Polarity Protection Shunt Diode Frequency Stability +/- 5 ppm Transmitter RF Output Power 5 watts max Modulation F3E (FM) Maximum Deviation 2.5KHz Spurious Emissions < -30dBm TX Audio Pre-emphasis +6dB/Octave from 300Hz to 3KHz Current Consumption 1.7 AMP with 50 ohm during TX antenna termination Receiver Circuit Type Dual conversion super heterodyne Intermediate Frequencies 1st IF: 21.4MHz, 2nd IF: 450KHz for Main RX Maximum Usable Sensitivity -123dBm for 12dB SINAD un-weighted Audio Output Power > 2 Watts at 8 ohm load RX Audio De-emphasis +6dB/Octave from 300Hz to 3KHz Signal to Noise Ratio > 40dB Conducted Spurious Emission > -57dBm Mechanical Dimensions (H x W x D) 31 X 128 X 147 Weight 548g Transceiver
700g Controller speaker microphone