Thornado 4 Inch 13HP (389cc) Petrol Water Transfer PumpThe THORNADO petrol water pump not only improve the power that you need but also a new design of the pump impeller and pump body thickness. The pump is powered by a true commercial 13HP 389cc 4 Stroke OHV engine. With a suction/discharge diameter of 100mm, or 4 inches, this water pump has a maximum delivery lift of 30m and a maximum water displacement rate of 86,000 litre per hour. With the ability to draw water up to 7m in height, the Thornado WP40AE is sure to be helpful to you in a variety of situations.
The engine is a 13HP (389cc) 4-stroke, single cylinder OHV forced air-cooled petrol engine with a recoil starter that makes it easy to get the equipment running and on task. Also with a 6.5 fuel tank, this water pump is ready for up to 2.6 hours at 3/4 load. The engine features a durablel steel cam and crank shaft, cast iron cylinder to withstand wear. High quality carburetor to get the pump start easily and low oil alert sensor for safe operation.
Highly efficient, the Thornado WP40AE petrol water pump has multiple uses because of its portability. This pump seems to be the perfect solution for using in variety of locations including flower nurseries and gardens, water plants, mines, factories, ships, and country sides where water needs to be drained remotely. THORNADO petrol water pump is an ideal solution not only for emergency jobs but also for daily routine.
Key Features- Powered by Thornado 13HP Petrol Engine
- EPA-III emission certified engine - Reduce carbon footprint
- Max heads 30 metres
- Max flows 86,000 litres per hour
- Suction depth 7 metres
- 4 inch Suction/Discharge Ports
- Anti-vibration design
- High-quality mechanical seal
- Rigid Mounted Cast Iron Volute and Cast Iron Impeller
- Heavy Duty Full Frame Protection
- Low oil alert installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
- 12 Months Warranty*
*****T&C's Apply, see Warranty Policy for full details.
SPECIFICATIONSModel NoTH-WP40AETypeSelf priming, Centrifugal pumpInlet Size4 inchOutlet Size4 inchMax Lift Head30mMax Flow86,000 litres/hourMax Suction Depth7mMax Pressure42 PSIMaterialAlluminium alloy pump housing, cast iron impeller and diffuserEngineTH-130QE (13HP)Engine Type4 stroke, air cooledMax Power HP / Rpm13HP / 3600 RpmDisplacement389ccFuel TypePetrolOil TypeSAE10w-30 / SAE30Fuel Tank Capacity6.5LOil Capacity1.6LRun Time Full Tank2.5h at loadStarting SystemRecoil startProduct Length670mmProduct Width550mmProduct Height630mmProduct Weight59kgIn the BoxWater pump, battery, hose fittings, hose clamps, intake strainer, spark plug wrench, user manual, Suitable Applications- Water transfer from dam
- Tank filling
- Shallow Well
- Water Carts
- Fish Farm (Fresh Water)
- Crop spraying