PZEM015 DC 0-200V LCD Car Battery Voltage Current Capacity Resistance Tester-ABS

Specifications:
Multifunctional battery tester, this meter is mainly used to test all kinds of battery's voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, dump energy, energy consumption and running time.
Display the measurement data through LCD screen.
Use external shunt, can matched with 50A, 100A, 200A, 300A four kinds of shunt.

Functions:
1. Voltage
Measuring range: 0-200V. (when the test voltage is less than 8V, please use the independent power supply mode)
Display format: less than 10V display as: 9.99V; less than 100V display as: 99.9V; greater than 100V display as: 199V
Minimum resolution: 0.01V
The starting test voltage: 0.05V
Measurement accuracy: 1%
2. Current
Measuring range: 0-10A (Type: PZEM-013); 0-300A(Type: PZEM-015) can set 50A, 100A, 200A,300A four range depend on the external shunt, the factory
default is 100A.
Display format: less than 1A display as: 999mA; ＜10A display as: 9.99A; ＜100A display as: 99.9A; ≥100A display as: 199A
Minimum resolution: 1mA
The starting test current: 10mA(Type: PZEM-013); 20mA(Type: PZEM-015)
Measurement accuracy: 1%
3. Power
Measuring range: 0-2000W (Type: PZEM-013); 0-60000W(Type: PZEM-015)
Display format:
＜10W display as: 9.99W
＜100W display as: 99.9W
＜1000W display as: 999W
＜10000W display as: 9.99kW
≥10000W display as: 19.9kw
Minimum resolution: 0.01W
The starting test power: 0.1W (Type: PZEM-013); 0.2W (Type: PZEM-015)
Measurement accuracy: 1%
4. Impedance
Impedance=Voltage/Current
Measuring range: 0-1000ohm
Display format:
＜100ohm display as: 99.9ohm
≥100ohm display as: 999ohm
When over the test range or the current is zero, it display "---"
Minimum resolution: 0.1ohm
Measurement accuracy: 1%
5. Internal Resistance
Internal resistance = (Full voltage - Bring load voltage)/Bring load current, when the bring load voltage is larger than the maximum voltage, the internal resistance is zero.
Measuring range: 0-999 milliohm
Display format: 999 milliohm, when over the test range or the current is zero, it display "---".
Minimum resolution: 1 milliohm
Measurement accuracy: 1%
Note: Before you test the internal resistance, you should preset the full voltage depend on the battery type, after it is fully charged you can use it to test; if you do not fully charge it, you can set the battery without load voltage is the full voltage, then test; the internal resistance is not a fixed value, the more the battery discharged, the bigger the resistance.
6. Capacity
Measuring range: 0-1000AH
Display format:
＜1AH display as: 999mAH
＜10AH display as: 9.99AH
＜100AH display as: 99.9AH
＜1000AH display as: 999AH
Minimum resolution: 1mAH
Measurement accuracy: 1%
Note: Battery capacity testing is a cumulative process of discharge current versus time, it need some time, the time is depend on the discharge current; before you test the capacity, you should preset the full voltage and the cut-off voltage depend on the battery type, after it is fully charged you can use it to the discharge test; When the dump energy display blank, it means the discharge is over, this capacity display value is the battery's capacity.
7. Dump energy
Dump energy is display vias the battery symbol, totally 10 grids, every grid present 10% energy. Dump energy is calculated vias the current battery voltage value, before test you should preset the full voltage and the cut-off voltage
depend on the battery type; every grid voltage = (the highest voltage - the lowest voltage)/10.
8. Accumulate energy consumption
Measuring range: 0-9999kWh
Display format:
＜1kWh display as: 999Wh
＜10kWh display as: 9.99kWh
＜100kWh display as: 99.99kWh
＜1000kWh display as: 999.99kWh
≥1000kWh display as: 9999kWh
Over the test range will become zero.
Minimum resolution: 1Wh
Measurement accuracy: 1%
Note: 1Wh=0.001kWh=0.001 Kilowatt
9. Running time
Measuring range: 0 ~ 999 hour (Without load the time will not accumulate)
Display format: 0:00:00 ~ 999:59:59 (Over the test range will become zero)

Item Name: Battery Tester
Material: ABS
Measuring Range: 10A(Without Shunt), 50A, 100A, 200A, 300A
Features: Multifunctional, LCD Screen, Useful
Item Size: 89.6mm x 44.6mm x 24.5mm/3.53" x 1.76" x 0.96" (Approx.)

Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.

Package Includes:
1 x Battery Tester
1 x Electric Wire
or
1 x Battery Tester
1 x Electric Wire
1 x Shunt