QP2299 Gas Leakage Detector Power On: Press and Hold For 3 Seconds GAS LEAKAGE DETECTOR

Radio Parts
QP2299 Gas Leakage Detector Power On: Press and Hold For 3 Seconds GAS LEAKAGE DETECTOR
QP2299 Gas Leakage Detector Power On: Press and Hold For 3 Seconds GAS LEAKAGE DETECTOR

Gas Leakage Detector

Gas leaks can be incredibly dangerous, even small ones. Run a quick check over your house or gas powered devices to make sure all outlets are safely sealed. Hold the power button for a few seconds and then place the detector near the suspected leak and visual/audible warnings will sound ifthe leak is bad, moderate or safe. Red (Hi), orange (Lo), and green (safe) LEDs denote the severity of the leak.

Indications:

Green - Power on with short beep / safe with no alarm Yellow - Lo alarm with short beep >2000ppm (0.2%) of methane (natural gas) detected Red - Hi alarm with long beep >4000ppm(0.4%) of methane (natural gas detected

Specifications:

  • Measurement ranges: 0-10,000 ppm
  • Power on: Press and hold for 3 seconds
  • Auto power off: Approximately 3 minutes
  • Requires 2 x AAA batteries (not included)
  • Sensor detects butane, propane, acetylene, and methane (natural gas)
  • Dimensions: 165(L) x 27(W) x 21(D)mm

Weight: 0.069