Set Of 15 Diamond Bits, Carbon Steel Hole Saw For Drilling Glass, Ceramics, Porcelain, Tiles And Marble.

Set Of 15 Diamond Bits, Carbon Steel Hole Saw For Drilling Glass, Ceramics, Porcelain, Tiles And Marble.
Set Of 15 Diamond Bits, Carbon Steel Hole Saw For Drilling Glass, Ceramics, Porcelain, Tiles And Marble.
Set Of 15 Diamond Bits, Carbon Steel Hole Saw For Drilling Glass, Ceramics, Porcelain, Tiles And Marble.
Set Of 15 Diamond Bits, Carbon Steel Hole Saw For Drilling Glass, Ceramics, Porcelain, Tiles And Marble.
Set Of 15 Diamond Bits, Carbon Steel Hole Saw For Drilling Glass, Ceramics, Porcelain, Tiles And Marble.
Set Of 15 Diamond Bits, Carbon Steel Hole Saw For Drilling Glass, Ceramics, Porcelain, Tiles And Marble.
Set Of 15 Diamond Bits, Carbon Steel Hole Saw For Drilling Glass, Ceramics, Porcelain, Tiles And Marble.
Set Of 15 Diamond Bits, Carbon Steel Hole Saw For Drilling Glass, Ceramics, Porcelain, Tiles And Marble.

EASY & Agrave; USE Center pilot tips are for wood, metal, etc. Here is how you can keep the drill bit on target: a- You can make your own plywood guide; - plastic or even cardboard.
You just need to hold the bit in place until what it marks the initial marks. b- It is possible to start drilling at an angle, with the edge of the bit forming a C-slot and then bringing the bit vertically.
c- You can manually guide the bit with a wet sponge.Package Included: 1*Diamond Drill Bit SetDescription: Applicable Industry: Suitable to the processing of stone, tiles, ceramics, glass and granite, etc. Silver color Quantity: 15 pieces Feature: The electroplated diamond coating wears out if the tool overheats.
Never let the bit dry out. Here's how to use water to cool the tool: a- You can build a mini water dam around the hole with plumber's grout. b- You can choose to spray water on the tip.
c- Or you can use running water to cool the bit. Note: Start your hole diagonally, make a round track then keep the drill straight. Drilling pressure and the increased use of lubrication at the bottom. water will greatly extend the life of the drill.
Speed ​​Kills: Reduced drilling speeds, low drilling pressure, and increased use of lubrication at the bottom. water will greatly extend the life of the drill. Warnings: Do not use on concrete or for depths greater than approximately 1/2"; water is required for drilling for lubrication.