Smart Bike Brake Tail Light Bicycle Rear Light Wireless Indicator Light Remote Control Steering Tail Light

Characteristic:
1. Wireless remote control intelligent induction brake taillight, eight-speed mode adjustment, high-strength PC material, compact and portable.
2. Simulate the dominant car rear lights, high light transmission, high brightness, soft light without glare.
3. Safe night driving auto brake detection sensor, when braking, the tail light will automatically switch to highlight mode for 3 seconds to warn the vehicles behind you.
4. The taillights are equipped with two remote control methods, wireless remote control / wired remote control.
5. The remote controls the left and right direction of the taillights and switches various warning states with a single button.
6. Triple warning lights are safer for night driving, left and right turn signals, brake warning lights.
7. Eight lighting modes: Direction mode: Press the direction key once to turn, then press it to go back and forward
8 mode. Six conventional lighting modes: constant light mode, slow flash mode, fast flash mode, burst flash mode, left and right flash mode and flash mode in the middle of both sides.
9. USB convenient charging, built-in 2000mAh 18650 lithium battery, to meet daily needs, USB fast charging methods are various.
10. The taillights can be adjusted up and down to a suitable position for use, convenient and practical.
11. IPX6 waterproof design, suitable for use in light to moderate rain, please do not soak in water, please plug the USB cover tightly when using.
12. Two Installation Methods: Installed on the seat tube/seat pad, the taillight is easy and convenient to install.
Specification:
Item Type: Taillight
Material: PC
Taillight Size: Approx. 11.6 x 5.6 x 3.1cm / 4.6 x 2.2 x 1.2 inch
Taillight Weight: Approx. 262g / 9.2oz
Taillight battery: built-in 3.7V 2000mAh rechargeable 18650 lithium battery (built-in battery shipped)
Taillight charging: USB charging
Installation method: seat tube, seat cushion Lighting mode: 8 types
Remote control battery: 1 x CR2032 240mAh button battery (built-in battery shipped)
Package list:
1 x Tail Light
1 x Remote
1 x Seat tube bracket
1 x cushion holder
3 x silicone strap
1 x wired remote control base
1 x wireless remote control base
1 x USB charging cable
1 x hex tool
2 x screws

Note:
When from the dismantling of the battery tail of the lamp, you must see the positive and negative poles of the battery. Reverse installation will cause the taillight to short and burn out.