Victron Dc-Dc Converter 24v-12v 20a Non Isolated IP67 Waterproof
Victron Dc-Dc Converter 24v-12v 20a Non Isolated IP67 Waterproof
Victron Dc to Dc Converter 24v to 12v 20 amp Non Isolated IP67 Waterproof
High efficiency
Using synchronous rectification, full load efficiency exceeds 95%.
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.
Extra-long input and output cables
Thanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.
Wide input voltage range
With 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.
Protected against overheating
It can be used in a hot environment such as a machine room.
Input voltage range 15-40VDC
Under voltage shutdown 13V
Under voltage restart 14V
No load current at 24V 50mA
DC output voltage 12V +/- 3%
Maximum continuous output current 10A
Efficiency 95%
Ripple & Noise 75mVpp
Operating temperature range (derate 3% per C above 40 C)
Overload protection Hiccup mode, recovers automatically after fault condition is removed
Short circuit proof Yes
Protection against reverse polarity connection
Victron Dc to Dc Converter 24v to 12v 20 amp Non Isolated IP67 Waterproof
Material & Colour Aluminium (blue RAL 5012)
Protection category IP67
DC connection Two input and two output cables, length 1,8m Bolts
Cable cross section, input 2.6mm (13 AWG)
Cable cross section, output 2.6mm (13 AWG)
Weight (kg) 300 g
Dimensions (h x w x d in mm) 74 x 74 x 32
Orion DC-DC converters, non isolated - Installation
1. First connect the minus cables (black) to the minus of the supply and to the minus of the load. Please note that a bad minus connection could result in output overvoltage.
2. Connect the load output (yellow) to the load.
3.. Connect the positive input (red) to the supply. The positive input must be protected by a fuse.
Recommended fuse rating: Converter 24/12-20A: Fuse rating 15 A
4. The Orion is now ready for use.
1103933