WaterMe -Wireless Irrigation Controller(1" Flow Sensor Included) + 2 x 1" Flow Sensors
WaterMe Irrigation Controller( 1" Flow Sensor Included) + Qty. 2 x 1" Extra Flow Sensors
Wireless Controller Features:
Remote access via mobile app or computer (internet connection required)
10 independent schedules
Permanent program memory
Photo Capture to identify Zones
Push notification sent to smart phone in case of leak or flow rate out of specification
Programmable master valve delay time
Programmable mist cycle
Included flow sensor 1" BSP (measuring range 2100 LPM)
Local weather synchronization automatically alters watering schedules
Input Capabilities
1 x Master Valve
10 x Solenoid Valves
3 x Flow Sensor (1 Included)
1 x Rain Sensor
1 x Moisture Sensor
Apple and Android mobile platform capable
Electrical Specification
Transformer input 24VAC, 50 Hz
Transformer output 24VDC 1.5 Ams
Maximum valve current 24VAC at 1.0 AMP
Functional
24VAC/DC valves (Max current draw 1000mA/Valve)
Controller provides full current on valve start up then reverts to low current on run, saving up to 70% power
DC latching valve compatible 612v DC
Weather resistant material
Apple and Android operating platform capable
Simple setup, operation and programming experience
Australian Designed and Engineered
1" Flow Sensor:
1" BSP Male Thread Inlet + 1" BSP Male Thread Outlet
Flow Range: 2 100 LPM
Repeatability <= 1%
Accuracy <=2.5% of FULL SCALE
Max. fluid temperature: 60 DEG C
Max. Ambient Temp. Range: 0 DEG C +60 DEG C
Max. Fluid Pressure: 1.5 Mpa
Operating Voltage: +5V + 24V
Output Frequency: Square Wave
Material:
Body: 30% Glass Filled Nylon
Support Spindle: 316 Stainless Steel
Paddle Wheel: Acetal (POM)
Oring: Nitrile
Screws: 304 Stainless Steel
This document has been composed with the free HTML edior. Click here to give it a try.