WaterMe -Wireless Irrigation Controller(1" Flow Sensor Included) + 2 x 1" Flow Sensors

WaterMe Irrigation Controller( 1" Flow Sensor Included) + Qty. 2 x 1" Extra Flow Sensors

Wireless Controller Features:

Remote access via mobile app or computer (internet connection required)

10 independent schedules

Permanent program memory

Photo Capture to identify Zones

Push notification sent to smart phone in case of leak or flow rate out of specification

Programmable master valve delay time

Programmable mist cycle

Included flow sensor 1" BSP (measuring range 2100 LPM)

Local weather synchronization automatically alters watering schedules

Input Capabilities

1 x Master Valve

10 x Solenoid Valves

3 x Flow Sensor (1 Included)

1 x Rain Sensor

1 x Moisture Sensor

Apple and Android mobile platform capable

Electrical Specification

Transformer input 24VAC, 50 Hz

Transformer output 24VDC 1.5 Ams

Maximum valve current 24VAC at 1.0 AMP

Functional

24VAC/DC valves (Max current draw 1000mA/Valve)

Controller provides full current on valve start up then reverts to low current on run, saving up to 70% power

DC latching valve compatible 612v DC

Weather resistant material

Apple and Android operating platform capable

Simple setup, operation and programming experience

Australian Designed and Engineered

1" Flow Sensor:

1" BSP Male Thread Inlet + 1" BSP Male Thread Outlet

Flow Range: 2 100 LPM
Repeatability <= 1%
Accuracy <=2.5% of FULL SCALE
Max. fluid temperature: 60 DEG C
Max. Ambient Temp. Range: 0 DEG C +60 DEG C
Max. Fluid Pressure: 1.5 Mpa
Operating Voltage: +5V + 24V
Output Frequency: Square Wave

Material:

Body: 30% Glass Filled Nylon
Support Spindle: 316 Stainless Steel
Paddle Wheel: Acetal (POM)
Oring: Nitrile
Screws: 304 Stainless Steel

This document has been composed with the free HTML edior. Click here to give it a try.