WaterMe - Wireless Irrigation controller & Orbit - Pump Start Relay
This product is no longer available.
Features:
- Remote access via mobile app or computer (internet connection required)
- 10 independent schedules
- Permanent program memory
- Photo Capture to identify Zones
- Push notification sent to smart phone in case of leak or flow rate out of specification
- Programmable master valve delay time
- Programmable mist cycle
- Included flow sensor 1" BSP (measuring range 2100 LPM)
- Local weather synchronization automatically alters watering schedules
Input Capabilities
- 1 x Master Valve
- 10 x Solenoid Valves
- 3 x Flow Sensor (1 Included)
- Rain Sensor
- Moisture Sensor
- Apple and Android mobile platform capable
Electrical Specification
- Transformer input 24VAC, 50 Hz
- Transformer output 24VDC 1.5 Ams
- Maximum valve current 24VAC at 1.0 AMP
Functional
- 24VAC/DC valves (Max current draw 1000mA/Valve)
- Controller provides full current on valve start up then reverts to low current on run, saving up to 70% power
- DC latching valve compatible 612v DC
- Weather resistant material
- Apple and Android operating platform capable
- Simple setup, operation and programming experience
- Australian Designed and Engineered
1" Flow Sensor:
1" BSP Male Thread Inlet + 1" BSP Male Thread Outlet
Flow Range: 2 100 LPM
Repeatability <= 1%
Accuracy <=2.5% of FULL SCALE
Max. fluid temperature: 60 DEG C
Max. Ambient Temp. Range: 0 DEG C +60 DEG C
Max. Fluid Pressure: 1.5 Mpa
Operating Voltage: +5V + 24V
Output Frequency: Square Wave
Material:
- Body: 30% Glass Filled Nylon
- Support Spindle: 316 Stainless Steel
- Paddle Wheel: Acetal (POM)
- Oring: Nitrile
- Screws: 304 Stainless Steel
- Orbit Pump Start Relay 2HP
- Used for starting pump unit from 24VAC output Irrigation controller
Features
- Automatically starts pump from output of controller
- Lockable weather resistant case
- Covered wiring compartment for protection
Technical Specs:
- Contact rating 2HP (1.5kw) at 240 volt
- 1 Phase, coil rating, 24VAC, 3VA
- Double pole, single throw 20 amp
- The Input will be connected with Master and second wire to the common.
Use the JavaScript minifier to compress the code before you publish a website.